[HECnet] RP07s to a good home...

[Dave McGuire]

  You do know how much an RP07 weighs, right?  (just checking)

              -Dave

On 05/04/2015 05:37 PM, Kari Uusimäki wrote:
> Yes, if it is not needed to be picked up right away.
> 
> 
> 
> 
> -------- Original message --------
> From: Pontus Pihlgren <pontus at Update.UU.SE>
> Date: 04/05/2015 23:54 (GMT+02:00)
> To: hecnet at Update.UU.SE
> Subject: Re: [HECnet] RP07s to a good home...
> 
> On Mon, May 04, 2015 at 11:18:18PM +0300, Kari Uusimäki wrote:
>> Hi,
>>
>> I'm interested in some of the stuff. The RP07 would be one of them.
>> How should we go forward with the discussion?
> 
> I'm just about to hit the sack. I'll send a mail to you, Ragge
> and the others tomorrow.
> 
> Will you be able to pick it up?
> 
> /P
> 
> 
>>
>>
>> Kari
>>
>>
>>
>> On 4.5.2015 23:05, Pontus wrote:
>> >On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
>> >>I've been working out a deal with Ragge and several others for a
>> >>few weeks now after announcing on CC-tech.
>> >>
>> >>I and Ragge strongly prefer that you go through me.
>> >>
>> >>The RP07 are still unclaimed and so is a lot more. Let me know
>> >>if you are seriously interested and I'll fill you in and include
>> >>you in future talks.
>> >>
>> >>/P
>> >>
>> >
>> >
>> >Hi
>> >
>> >I realize now that I might have worded the above a bit strong. You are
>> >welcome to spread this as much as you want. But it will probably benefit
>> >all if I'm in the loop.
>> >
>> >Anyway, now that I have a proper keyboard (not just my phones onscreen
>> >one) I can give you some more details. It's the computer club in Luleå
>> >that is cleaning out old "junk". Here are some pictures:
>> >
>> >http://brain.brokenbrain.se/skrot_dh1/
>> >
>> >Take a break and look at them now.
>> >
>> >Now that you are back, here is what is shown, more or less.
>> >
>> >Spoken for:
>> >
>> >  * DECsystem 5500
>> >  * Nord-10 crates
>> >  * ND-100 cards
>> >  * HAWK-disks
>> >  * Terminalen for Nord-10
>> >  * 10-20 1/2" band
>> >  * A bunch of cabling, docs and 5 1/4" floppies with software for Nord
>> >computers.
>> >  * DEC 8400
>> >  * DEC PRO380
>> >  * RA72
>> >  * Unibus och BiBus-kort and some XMI.
>> >  * RX01 -floppies
>> >  * 4000/500
>> >  * 4000/90 (memory removed)
>> >  * infoserver 100
>> >  * 2 * R215F
>> >  * RX01/02-floppies
>> >  * 11/750 without PSU
>> >
>> >Probably spoken for (we are working out the shipping details):
>> >
>> >  * DEC 8400
>> >  * MicroVAX 8354
>> >  * TU81 /w RA82
>> >
>> >Not spoken for:
>> >
>> >  * 4000/60
>> >  * 1/2" tapes (lot of them)
>> >  * Two RA90's
>> >  * MV3900 /w RA82 and RL02 on top.
>> >  * VAXstation 3100
>> >  * VAXserver 3100
>> >  * Two Vaxstation 3100/76
>> >  * HSC90
>> >  * Two RP07, one spare part.
>> >  * MikroVAX 3800
>> >  * MicroVAX only marked 640QR?
>> >  * Lots of CI and SDI cabling.
>> >  * 4000/300 (looked empty unfortunately)
>> >
>> >Before you ask the brief case with test equipment on picture
>> >20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
>> >it.
>> >
>> >Regarding shipping, there are two cars going from Luleå to Uppsala that
>> >can bring a moderate amount of gear.
>> >
>> >I'll answer any questions you might have as best I can.
>> >
>> >Regards,
>> >Pontus.
>> >
>> >.
>> >
>>


-- 
Dave McGuire, AK4HZ
New Kensington, PA