<div dir="ltr"><div dir="ltr"><div dir="ltr">Hi,<div><br></div><div>I have just finished doing a bit of network cleanup on my ASA and 1841 and noticed that a number of the HECnet GRE tunnels seems to be down or possibly misconfigured.</div><div><br></div><div>I know that my IP address changed a while back as part of the transition to Australia's National Broadband Network (NBN) and my router can now be found at 110.141.227.104. I am pretty sure that Brian sent out an update, but I'm not sure how well it was applied.</div><div><br></div><div>Since changing IP addresses I've only been able to establish a tunnel with 50.131.218.138 (area 42).  However, when I attempt to ping the other end I am unable to reach 42.1023.</div><div><br></div><div>After looking at my firewall logs I noticed that someone at 81.135.164.245 was attempting to establish a GRE tunnel.  After looking at the existing configuration I noticed that it was a similar address to what had been last configured for area 22.  I made the change and now I can establish a link to area 22 and I can successfully ping 22.1023.</div><div><br></div><div>However, that is were it ends.  I have tunnels configured for area 59, 23, 61, 9 and 52, but I have no connection to the other end.  Worse, I have no connection to the HECnet as a larger entity.</div><div><br></div><div>Is anyone else other than myself and Mark Darvill still using the tunnels?  If there is a lack of interest in the maintenance, I would be happy to take it over and start running the bridge here too.</div><div><br></div><div>Thoughts?  Anybody... :-)</div><div><br></div><div>Regards, Tim.</div></div></div></div>