<div dir="auto">Thanks Johnny and thanks Mark. For some reason I thought that this was already done since IP was working. <div dir="auto"><br></div><div dir="auto">This is just what I needed to know to finish this thing off. I really appreciate the assistance.</div><div dir="auto"><br></div><div dir="auto">Kurt</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Jun 8, 2019, 5:32 AM Johnny Billquist <<a href="mailto:bqt@softjar.se">bqt@softjar.se</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Kurt, Mark is absolutely right.<br>
<br>
You do not have the IP line driver generated into DECnet.<br>
<br>
This is what I suspect quite a few mails back between us, and tried to <br>
point out.<br>
<br>
And do not try to just edit CEMAC.MAC to add those lines Mark mention. <br>
That will not work. You need to run through the DECnet generation <br>
process, and then the IPNET postprocessing step. It's all in the TCP/IP <br>
manual, if you read it.<br>
<br>
   Johnny<br>
<br>
On 2019-06-08 05:58, Mark Matlock wrote:<br>
> Kurt,<br>
>     I think you need to have the “IP" network device NETGENed into DECnet.<br>
> <br>
>    The fact that you first error occurs at the NCP SET PROC IP TOP makes me think that DECnet does not have a driver for the IP device loaded. When I made the “Frodo” distribution available, I did a new SYSGEN for an 11/70 and also a NETGEN. In the NETGEN for the Unibus system a “UNA” was the ethernet device and on a Qbus system (the actual Frodo 30.1) a QNA device is used.<br>
> <br>
>     It would be helpful if you typed out LB:[5,54]CETAB.MAC as it could confirm if the IP device has been NETGENed in or not. In CETAB.MAC the 3rd actual line of code should look like:<br>
> <br>
> PDV$DF  <AUX,EVL,ECL,XPT,NCT,RTH,LAT,DLX>,<EPM>,<UNA,IP><br>
> <br>
> Three lines below that should be:<br>
> <br>
> SLT$DF  IP,IP,XPT,LF.TIM,0,0,,0.,0.,15.<br>
> <br>
>     It’s been a while since I added the IP-0-0 LIN and Circuits to my system, but I try to do that to one of my PiDP-11s and post the walk through for it.<br>
> <br>
>     Below I’ve put some information of the sequence of startup command files that may help you understand the files involved.<br>
> <br>
>    In the LB:[1,2]STARTUP.CMD of the Frodo distribution RSX and DECnet are started as is normal for any RSX. It then chains to LB:[1,2]INSPROG.CMD which brings up the DU1: disk that you either download from <a href="http://RSX11M.COM" rel="noreferrer noreferrer" target="_blank">RSX11M.COM</a> or the Simh boot.ini will make a blank one.<br>
> <br>
>    At the end of the INSPROG.CMD two questions are asked with timeouts. The first will load LAT and the second loads Johnny’s TCP/IP. It loads the TCP/IP by chaining to LB:[IP]IPINS.CMD which will load TCP/IP and either DHCP an IP address or set a static IP address. At the end of that file then LB:[IP]IPAPPL.CMD is executed which sets up FTP, TELNET, NTP and other applications.<br>
> <br>
>    Now, in the Frodo distribution IPAPPL.CMD, there is a line that was either commented or deleted that chains to LB:[IPNET]INSHECNET.CMD which is used to link the actual node Frodo (HECnet 30.1) to MIM<br>
> <br>
>    Your [IPNET]INS.CMD looks identical to the INSHECNET.CMD on Frodo including the host port # which may be something we need to change?<br>
> <br>
>    Do you have a HECnet address from Johnny? Also, where are you planning to connect to HECnet?<br>
> <br>
> There is a [IPNET]INS.NEW which is the template that Johnny provides and it does not have a port specified on MIM. I don’t remember the exact mechanics on MIM That accepts connections but that may be a function of that port # Frodo connects to MIM on IP-0-10 but that is not specified on Frodo but on MIM.<br>
> <br>
> Best,<br>
> Mark<br>
> <br>
> <br>
> <br>
> <br>
> <br>
>> On Jun 7, 2019, at 9:35 PM, Kurt Hamm <<a href="mailto:kurt@hamm.me" target="_blank" rel="noreferrer">kurt@hamm.me</a>> wrote:<br>
>><br>
>> So, I added this command to the startup.cmd:   @LB:[IPNET]INS.CMD.<br>
>><br>
>> I didn't modify the file yet.  I wanted to see what it would do<br>
>><br>
>> The result after rebooting was this:<br>
>>> INS LB:[IPNET]MLTCOM/UIC=[1,54]/PRO=[RW,RW,,]<br>
>>> INS LB:[IPNET]MLTNET<br>
>>> INS LB:[IPNET]MLTCFG<br>
>>> NCP SET PROC IP TOP<br>
>> NCP -- Set failed, unrecognized component, Process<br>
>>> NCP SET LIN IP-0-* ALL<br>
>> NCP -- Set failed, invalid identification format, Line<br>
>>> MNC SHO VER<br>
>> Initialize common<br>
>> NT.IP  not found. Exiting...<br>
>>> MNC SET CIR IP-0-0 TCA HOST <a href="http://MIM.UPDATE.UU.SE:7705" rel="noreferrer noreferrer" target="_blank">MIM.UPDATE.UU.SE:7705</a> PORT 0<br>
>> Initialize common<br>
>> NT.IP  not found. Exiting...<br>
>>> NCP SET CIR IP-0-0 STA ON<br>
>> NCP -- Set failed, invalid identification format, Circuit<br>
>><br>
>> There are lots of errors, so I am not sure where to start.<br>
>><br>
>> Any advice would be appreciated.<br>
>><br>
>> Kurt<br>
> <br>
<br>
<br>
-- <br>
Johnny Billquist                  || "I'm on a bus<br>
                                   ||  on a psychedelic trip<br>
email: <a href="mailto:bqt@softjar.se" target="_blank" rel="noreferrer">bqt@softjar.se</a>             ||  Reading murder books<br>
pdp is alive!                     ||  tryin' to stay hip" - B. Idol<br>
</blockquote></div>