<div dir="ltr">Sorry.  I am bad with in-line comments.  I have read the rest of your email and will look at the collector.<div><br></div><div>Thanks!</div><div><br></div><div>Kurt</div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sat, Jun 8, 2019 at 6:42 PM Johnny Billquist <<a href="mailto:bqt@softjar.se">bqt@softjar.se</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Ok, a quick rundown on some of the more esoteric details about lines and <br>
circuits might be useful here.<br>
<br>
First of all, Kurt, you might want to redo the NETGEN and not set the <br>
system up for DECnet routing. It takes a lot of resources, and if you <br>
don't really want it, you are much better off with a system not even <br>
generated for it.<br>
<br>
The question about remote nodes are just for an initial population of <br>
your local nodename database. All you need there is really to define MIM <br>
(1.13). You can then copy the whole nodename database from MIM over to <br>
your machine that way instead. Let me know if you want some details on <br>
that step.<br>
<br>
<br>
On 2019-06-08 22:25, Mark Matlock wrote:<br>
> Kurt,<br>
>     If you want two circuits like UNA-0 and IP-0-0 I think you have to <br>
> be a routing node (but not an area router).<br>
<br>
Not really, but maybe. If you define multiple circuits, and are an <br>
end-node, only one circuit will be active. But others can exist, and the <br>
system will fall back to some other circuit if the active one goes down. <br>
So it can be used as a back connection.<br>
<br>
However, even as an end-node, you can have several *lines* on and active <br>
at the same time. And this is a trick to use if you want DECnet-over-IP, <br>
but want to be an endnode. You need ethernet for TCP/IP to work, but you <br>
do not want DECnet to use the ethernet circuit.<br>
<br>
But you configure one IP line as well, and that is the one DECnet will <br>
be using. Meanwhile, TCP/IP is using the ethernet line.<br>
<br>
It might sound a little confusing, but think about it for a second, and <br>
I hope it becomes clear. Otherwise, just ask, and I'll try to explain it <br>
better.<br>
<br>
> Also, you should define all the nodes you want to talk to with NCP in <br>
> one of the startup files or do it with CFE but I prefer startup so it’s <br>
> simple to change.<br>
<br>
I would actually say that you wouldn't. Of course, there is nothing <br>
wrong in doing this, but if you want the full HECnet nodename database, <br>
it contains 700 nodes. That will take a while to type in.<br>
<br>
However, you can copy the nodename database from another DECnet node, <br>
and then use this.<br>
<br>
But you need at least the nodename of someone where you will be copying <br>
from to start with, which is why I suggested adding MIM at the start.<br>
<br>
After that, there is [5,54]NNC which is the nodename collector task. Run <br>
it, collect names from another node, and build a new database with this. <br>
Then stop and restart the node name server, and you have all the nodes <br>
defined.<br>
<br>
(The node name server is managed by the command SCP.<br>
So, SCP STOP followed by SCP START will do it.)<br>
<br>
   Johnny<br>
<br>
-- <br>
Johnny Billquist                  || "I'm on a bus<br>
                                   ||  on a psychedelic trip<br>
email: <a href="mailto:bqt@softjar.se" target="_blank">bqt@softjar.se</a>             ||  Reading murder books<br>
pdp is alive!                     ||  tryin' to stay hip" - B. Idol<br>
</blockquote></div>