[HECnet] Next retro comms project?

[Steve Davidson]

I forgot about the SNA product for Windows NT 3.51/4.0.   I have a couple of those kits hanging around.   I don't have the SNA hardware but I do have the software.

Any takers?   I certainly don't need them?


-----Original Message-----
From: owner-hecnet at Update.UU.SE on behalf of Jason Stevens
Sent: Wed 10/21/2009 10:33
To: hecnet at update.uu.se
Subject: Re: [HECnet] Next retro comms project?

Microsoft SNA server works pretty well for that, and it's easy to find...
Many moons ago I had TONNES of machines setup in that kind of manner, with
type 1 token ring to boot! (4mbit).

Even with Windows NT 3.51 & 4.0 it worked surprisingly well. (SNA Server 2.x
was waaay better then 3.x & 4.x IMHO).   Anyways it was easy to connect the
tokenring to the FEP, but later on we got cisco routers that would do
translational bridging and local ack so we   moved our SNA servers to
ethernet only..   Just remember to flip the bits of the FEP address as the
endian is different from ethernet to tokenring.

I've also done the netware SNA gateway, but it was living hell to setup... I
doubt I could get it to work again...

On Wed, Oct 21, 2009 at 10:26 AM, Fred <fcoffey at thrifty.misernet.net> wrote:

On Wed, 21 Oct 2009, Sampsa Laine wrote:

I thought SNA mostly ran on Token Ring or something?


I have an IBM PS/2 model (something) with both an MCA Token Ring card and
and MCA Ethernet - and I even have a passive Token Ring Mau! (and a cable,
somewhere ...)

Now if I could just find that gateway software.   When I had access to a
real mainframe, all of the PC's went through a handful of these PS/2's via
Ethernet, and the PS/2's had token ring cards in them connected to a real
FEP.

Fred