[HECnet] DECNET Phase IV for Tru 64

[Sampsa Laine]

Just a side note: I discovered that with a bit of jiggling and poking the PAKGEN I have that does VMS PAKs works for Tru64 too.

Just in case anyone has lost their PAK..


On 17 Jul 2010, at 11:04, H Vlems wrote:

A pity because despite its elegance and well thought out design DECnet-Plus
(or phase V or DECnet OSI) is a lot moredifficult to maintain and manage
than phase IV. I have the appropriate DECnet versions for the three Tru64
versions that I run. My experience with Tru64 is very limited and I do not
feel an urge to get more confused by running versions even older than
V5.0...
Hans

-----Oorspronkelijk bericht-----
Van: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] Namens
Mark Wickens
Verzonden: zaterdag, juli 2010 10:48
Aan: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] DECNET Phase IV for Tru 64

On Sat, 2010-07-17 at 08:33 +0100, Mark Wickens wrote:
On Sat, 2010-07-17 at 00:40 +0100, Sampsa Laine wrote:
I remember people discussing running DECNET on Tru64 here a while
back, is there a DECNET IV package available for it? Anyone have a copy?

Sampsa



Yes, I've got it here - I'll put the packages on tiger in the anonymous
ftp account.



Apologies,

It is decnet+, the version I use is 4.0B on 4.0G - I didn't have any
problems configuring it up for use with HECnet however.

I can check for a more recent version if you don't have one.

Mark.

Geen virus gevonden in het binnenkomende-bericht.
Gecontroleerd door AVG - www.avg.com
Versie: 9.0.839 / Virusdatabase: 271.1.1/3009 - datum van uitgifte: 07/16/10
21:19:00