[HECnet] Downloading software to a DECSERVER 200 over MOP?

[hvlems at zonnet.nl]

Ok, log on to node CESIUM, user Hecnet passw is gast (case insensitive). 
In the logon dir you'll find p*.sys files, one for the DS100 and the other is for the DS200. 
The file MOPNCP.TXT tells you how to configure a DECnet load host
PHONE SYSTEM for on line help
Hans
Verzonden vanaf mijn draadloze BlackBerry  -toestel

-----Original Message-----
From: Sampsa Laine <sampsa at mac.com>
Sender: owner-hecnet at Update.UU.SE
Date: Sun, 14 Aug 2011 14:05:39 
To: <hecnet at Update.UU.SE>
Reply-To: hecnet at Update.UU.SESubject: Re: [HECnet] Downloading software to a DECSERVER 200 over MOP?

I did not really understand any of that :)



On 14 Aug 2011, at 14:00, Kari Uusim  ki wrote:

On 14.8.2011 15:15, Sampsa Laine wrote:
Guys,

Back for ages my DECSERVER used to boot up using someone's MOP box in Sweden I believe;

This is no longer the case, and this being my only console access to RHESUS i would appreciate some instructions on how to set up this soft-downline-loading setup (and possibly the necessary binaries).

Sampsa





.


Assuming you are using Alpha and VMS V7.3 or newer.

$ MC LANCP
LANCP> SET DEVICE EWA0 /DLL=ENABLE
LANCP> DEFINE NODE DS200/ADDRESS=08-00-2B-11-22-33 /FILE=PR0801ENG.SYS
LANCP> EXIT

Copy the PR0801ENG.SYS image using the qualifier /continuous to the directory MOM$SYSTEM.

You'll find the image using anonymous ftp at juhani.exdecfinlnd.org

Kari