[HECnet] Multinet Tunnel Links defined

[Peter Lothberg]

Add an additional connection to Multinet for SG1.   Use 69.21.253.230.   I
would set your costs (because you are an "end node") as follows:

GORVAX = 3   Shortest distance and high speed
SG1       = 5   Medium distance and medium speed
LEGATO > 5   Longest distance and slower speed

It ended up being:

DECNET-CONFIG>show
Circuit Name                     IP Destination                       Cost             HelloTimer
------------                     ---------------                     ----	      -----------
TCP-0-0                               64.142.52.93                             10                       300
TCP-0-1                               188.220.63.6                               5                       300
TCP-0-2                               69.21.253.230                             7                       300

It;s actually a routing-IV node... -:)

My speed is limited by the Uvax2, not the network (well the dequna is
only 10Mbit...)

I have mentioned it before, but I also have a cisco router on the same
LAN that can do DECnet in IP the cisco way if anyone wan't to try.

Thanks!   --P