[HECnet] How do I get a DS10's onboard NIC into 100 mbps mode?

[hvlems at zonnet.nl]

Fast translates as 100 Mb/s half duplex and you wouldn't want that. 
Auto is not always sufficient. There are two auto modes, auto negotiate and auto sensing. IMHO the latter is better avoided. 
------Origineel bericht------
Van: Oleg Safiullin
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] How do I get a DS10's onboard NIC into 100 mbps mode?
Verzonden: 28 september 2011 08:31

Use "set ewb0_mode fast" or "set ewb0_mode auto" SRM command.


Sampsa Laine wrote:
I   just looked at CHIMPY's network device and noticed it's in 10 mbps mode. 

--- snip ---
$ show dev ewb0/full

Device EWB0:, device type DE500, is online, network device, error logging is
      enabled, device is a template only.

      Error count                                       2       Operations completed                                   0
      Owner process                                 ""       Owner UIC                                           [SYSTEM]
      Owner process ID               00000000       Dev Prot                           S:RWPL,O:RWPL,G,W
      Reference count                               0       Default buffer size                                 512

Operating characteristics: Link up.

      Speed (Mbits/sec)                         10
      Def. MAC addr   08-00-2B-87-5B-87       Current MAC addr           AA-00-04-00-91-21

-- snip --

I thought they support 100 mbps as well? How do I turn that on? It's currently connected to a Gbps switch.

Sampsa