[HECnet] Config

[Boyanich, Alastair]

Hi Johnny!

No stress. I was just overly enthusiastic. 

Al

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Johnny Billquist
Sent: Saturday, 28 April 2012 8:22 PM
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Config

Sorry, Alastair. I've been rather busy, but I did see your mails. I'll
get to it later today, I hope.

Anyway, the config looks ok. If you are available later today/tonight,
we could try get you up and running...

	Johnny

On 2012-04-26 02:57, Boyanich, Alastair wrote:

G'day,

I'll send here because I suspect my emails late last week to Mr
Bilquist
may have been consigned to a junk mail folder. I wanted to (please)
apply for a HECnet address initially for one my main VAX at home,
later
the 11's after I get some more time to work on the hardware.

I managed to get the bridge software to compile under IRIX 6.5.29
via
GCC 4.6. MIPSPro refused with a couple of trivial errors. I believe
I
have the config file correctly set up and the ports.
The relevant bits of my conf look like:

!START
[bridge]
local ec0
update tempo.update.uu.se:4711

[decnet]
local
update

[lat]
local
update
!EOF

Port 4711 is forwarded to my system correctly through firewalls. My
external static ip is 202.168.106.176/ns4.reboot.net.au

Suggestions/constructive abuse welcome :)

Regards,
Al.



--
Johnny Billquist                                   || "I'm on a bus
                                                                    ||   on a psychedelic trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" - B. Idol