[HECnet] Tops20

[Peter Lothberg]

On 1/11/2012 8:37 PM, Peter Lothberg wrote:
MRC's Panda T20 monitor talks DECnet with KLH, you just need to get the
host it runs on to handle the MAC address change and Ethernet multicast
packets.

Both T10 and T20 suffers from that it's tricky to open a IP-tunnel from
inside the monitor itself.

I poked around with a combination of user-program and kernel-decnet interface
to talk DECnet over IP/UDP the way Multinet does it.

As any small cisco router talks DECnet in IP, I solved the problem
that way...

-P

(and there was a radi64 encoded blob I could not read on this subject,
sorry...)

bart#show decnet
% DECnet is not enabled

This is a cisco router I guess?

Any idea how I enable it?


!
decnet routing 59.11
decnet node-type routing-iv
!
!
interface Tunnel3000
no ip address
logging event subif-link-status
decnet cost 10
tunnel source 192.108.200.213
tunnel destination 199.0.131.2
!
interface Ethernet0
ip address 192.108.200.213 255.255.255.248
no ip directed-broadcast
logging event subif-link-status
decnet cost 10
decnet router-priority 125