[HECnet] netowrk flapping....

[Bob Armstrong]

Steve -

  You said you have an FVS338, right?   Which timeout values on which setup
screen did you change?

  I want to check my FVS338 to see how it's set. 

  BTW, you did define (under Security >> Services) a service for UDP 700,
right?   And then under Security >> Firewall, you added incoming and outgoing
rules for that service ?

Bob


-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
Of Steve Davidson
Sent: Sunday, June 10, 2012 7:45 AM
To: hecnet at Update.UU.SE
Subject: RE: [HECnet] netowrk flapping....

I have increased the timeout values on the router that is attached to SG1::.
Hopefully this improves matters.

-Steve 

-----Original Message-----
From: owner-hecnet at Update.UU.SE
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of hvlems at zonnet.nl
Sent: Sunday, June 10, 2012 03:08
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] netowrk flapping....

Bob, on A44RTR is see SG1 flapping as well. After breakfast I'll see 
whether there is a pattern. Initially I thought it was the linux 
laptop going to sleep after a whule. That may not be the case.
Hans
------Origineel bericht------
Van: Bob Armstrong
Afzender: owner-hecnet at Update.UU.SE
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: RE: [HECnet] netowrk flapping....
Verzonden: 10 juni 2012 01:32

Yup, that's basically a deficiency I've got... 

  Yeah, but the next question is "Are you the only one", or do other 
people's routers have similar timeout issues?

Bob