[HECnet] Who was doing that HECnet mapping work?

[Rob Jarratt]

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Mark Wickens
Sent: 07 April 2013 08:58
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Who was doing that HECnet mapping work?

On 07/04/2013 00:31, Rob Jarratt wrote:
What version of VMS are you running on the two machines you tried it
from?

Thanks

Rob

From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE]
On Behalf Of Mark Wickens
Sent: 07 April 2013 00:13
To: hecnet at Update.UU.SE
Subject: Re: [HECnet] Who was doing that HECnet mapping work?

On 06/04/2013 23:54, Rob Jarratt wrote:
NCP TELL A5RTR SHOW KNOWN CIRCUITS
Had more success from SIMVAX:

$ MCR NCP TELL A5RTR SHOW KNOWN CIRCUITS


Known Circuit Volatile Summary as of   6-APR-2013 22:48:15

     Circuit                   State                                     Loopback         Adjacent
                                                                                           Name           Routing Node

   eth2                           on                                                               5.8
   psilo.update.uu.seon                                                               1.13
   psilo.update.uu.seon                                                               1.15
   psilo.update.uu.seon                                                             62.637
   psilo.update.uu.seon                                                             59.11
   psilo.update.uu.seon                                                             42.1022
   psilo.update.uu.seon                                                             14.1
   psilo.update.uu.seon                                                               8.400
   psilo.update.uu.seon                                                               4.248
   psilo.update.uu.seon                                                             44.1023
   psilo.update.uu.seon                                                             19.41
   psilo.update.uu.seon                                                             28.41
   psilo.update.uu.seon                                                             47.556
   psilo.update.uu.seon                                                             11.2
   psilo.update.uu.seon                                                               2.1

Command completed.

Regards, Mark.
Hi Rob,

The VAX (SIMH, successful run) is running OpenVMS 7.3, the Alpha (first
run) is running OpenVMS 8.3

Regards, Mark.


Interesting. I think the other person who failed also runs OVMS 8.3, so it
looks like more modern OSs can't connect. I don't have 8.3, any chance you
could let me have a guest account on your 8.3 machine so I can test?

Thanks

Rob