[HECnet] Who was doing that HECnet mapping work?

[Brian Hechinger]

Actually, I hadn't tried. :)

-brian

On 4/4/2013 2:24 PM, Rob Jarratt wrote:
I see you tried and it looks like you failed. I didn   t have a packet sniffer running at the time so I can   t see the exact reason it failed, but I think I know some things to look at. If you try again could you run a packet sniffer and send me the data?
  
Thanks
  
Rob
  
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf Of Brian Hechinger   Sent: 04 April 2013 01:35   To: hecnet at Update.UU.SE   Subject: Re: [HECnet] Who was doing that HECnet mapping work?
  
That was me.      I haven't touched that code in a while but I should go take a look at it again. It used SHOW KNOWN CIRCUITS and SHOW ADJ NODES.      Let me know when you're back online and I'll play with that some more.      -brian      On 4/3/2013 6:55 PM, Rob Jarratt wrote:
A while ago there was discussion of a program or DCL script that was automating the creation of a map of HECnet. It stumbled when it came to my user mode router because it did not implement NICE. Well, I have been doing some work to rectify that. The work is far from complete, but under the right circumstances and with a fair wind you can get A5RTR to tell you the output of SHOW KNOWN CIRCUITS.
Who was doing that work, and which commands needed to be supported for the program/script to work?
Regards
Rob
NB A5RTR is not on HECnet at the moment because I have had a change of IP address and I am waiting for Johnny to tell his bridge to re-read its config.