[HECnet] RE: [DECtec] disk loading success

[Cory Smelosky]

________________________________________
From: DECtec [dectec-bounces at dectec.info] on behalf of Dave McGuire [mcguire at neurotica.com]
Sent: Saturday, December 14, 2013 5:16 PM
To: DEC discussion list.; hecnet at Update.UU.SE
Subject: [DECtec] disk loading success


  Then, armed with confidence from that success, I dismounted and
unplugged the RA90 from the VAX-7000 and plugged it into a PDP-11/44
(2MB, FPP, CIS, UDA50) and booted it.   That worked too! =)

This makes me really want to get my 11/44 working...and get the UDA50 I'm owed.

I'll also need an SDI drive and cable...or 3.

  (Now of course I could do the same with a Qbus PDP-11, with a KDA50
SDI controller.)

  My first desire was to do the actual RSTS/E install under simh on the
VAX-7000 directly to the raw device, but that crashed for reasons
unknown.   Mark Pizzolato told me that it was unlikely to work, so I may
not investigate that any further.

  Tonight, I will likely put together a VAX4000-700 in a BA440 chassis
with DSSI drives.   Into that I will put a KDA50 (I have an S-box KDA50
distribution panel) and use that in the role of the VAX-7000 for this
type of stuff in the future.

If I could convince you to spare an SDI disk, I could have you write images for me! ;)

                                  -Dave

--
Dave McGuire, AK4HZ
New Kensington, PA

--

DECtec mailing list
http://dectec.info

To unsubscribe from this list see page at: http://dectec.info/mailman/listinfo/dectec_dectec.info