[HECnet] DECnet-Plus and Phase IV Issues

[b4 at gewt.net]

From: b4 at gewt.net
To: hecnet at update.uu.se
Sent: Wednesday, February 13, 2013 1:09:03 PM
Subject: [HECnet] DECnet-Plus and Phase IV Issues

Hello!

I (think) I am following the correct NCL syntax here...but..

ncl> create node 0 routing circuit csmacd-0 type = csma-cd
ncl> set node 0 routing circuit csmacd-0 data link entity csma-cd
ncl> set node 0 routing circuit csmacd-0 enable phaseiv address true
ncl> enable node 0 routing circuit csmacd-0

Node 0 Routing Circuit csmacd-0 
AT 2013-02-13-13:05:26.514-05:00I-----

FAILED IN DIRECTIVE: Enable
DUE TO: Error specific to this entity's class

REASON: Open Port Failed
Description: The Open Port call to the specified Data Link failed

Any ideas what i'm doing wrong?

____
This is the script:

create csma-cd   create csma-cd station csmacd-1 communication port tu0   enable csma-cd station csmacd-1   create routing circuit circuit-1 type csma-cd   #   # The following command sets the inactive area address, which is used   # to enable transmission and receipt of ISO 8473 Inactive Subset PDUs,   # also known as Null Internet. This functionality is disabled by   # default. To enable Null Internet, remove the comment character   # from the following command.   #   create node 0 routing type endnode   set node 0 routing phaseiv address = 9.3   enable node 0 routing   set routing circuit circuit-1 enable phaseiv address true   set routing circuit circuit-1 data link entity csma-cd station csmacd-1   enable routing circuit circuit-1