[HECnet] Issues With Virtual Cisco Tunnels and HECnet

Dave McGuire mcguire at neurotica.com
Wed Jan 9 20:10:57 PST 2013 

On 01/09/2013 11:05 PM, Cory Smelosky wrote:
I've got some debugging info here:

marianne#debug decnet packets
DECnet packet forwarding debugging is on
marianne#debug decnet events
DECnet packets (errors) debugging is on
marianne#debug decnet adjacencies
DECnet adjacencies debugging is on
marianne#debug decnet adjacencie
*Jan   9 23:03:31.615: DNET-ADJ: Endnode hello from 9.10
*Jan   9 23:03:31.707: DNET-ADJ: Endnode hello fr
*Jan   9 23:03:32.747: DNET-ADJ: Endnode hello from 9.23
*Jan   9 23:03:33.879: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel0, blksize 1498
*Jan   9 23:03:33.879: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel0, blksize 1498
*Jan   9 23:03:33.883: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel1, blksize 1498
*Jan   9 23:03:33.887: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel1, blksize 1498
*Jan   9 23:03:33.891: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Ethernet1/0, blksize 1498
*Jan   9 23:03:33.891: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Ethernet1/0, blksize 149
DECnet adjacencies debugging is on
marianne#
*Jan   9 23:03:33.895: DNET-ADJ: Sending version 2.0 hellos to all end nodes on int Ethernet1/0, blksize 1498
*Jan   9 23:03:34.091: DNET-ADJ: Endnode hello from 9.8
*Jan   9 23:03:36.675: DNET-ADJ: Endnode hello from 9.2
*Jan   9 23:03:37.663: DNET-ADJ: Endnode hello from 9.22
*Jan   9 23:03:37.691: DNET-ADJ: Level 2   hello from 61.1
*Jan   9 23:03:37.723: DNET-ADJ: Level 2 (IV+) hello from 61.1
*Jan   9 23:03:38.579: DNET-ADJ: Level 2   hello from 9.1
marianne#
*Jan   9 23:03:38.883: DNET-ADJ: Endnode hello from 9.11
*Jan   9 23:03:39.547: DNET-ADJ: Level 2   hello from 9.1
marianne#ping
*Jan   9 23:03:42.959: DNET-ADJ: Endnode hello from 9.141.13

Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:

*Jan   9 23:03:45.131: DNET-PKT: Packet fwded from 9.1023 to 1.13, via 61.1, snpa 0000.0000.0000, Tunnel0
*Jan   9 23:03:46.575: DNET-ADJ: Endnode hello from 9.10
*Jan   9 23:03:46.995: DNET-ADJ: Endnode hello from 9.12
*Jan   9 23:03:47.743: DNET-ADJ: Endnode hello from 9.23
*Jan   9 23:03:48.879: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel0, blksize 1498
*Jan   9 23:03:48.883: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel0, blksize 1498
*Jan   9 23:03:48.887: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel1, blksize 1498
*Jan   9 23:03:48.887: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel1, blksize 1498
*Jan   9 23:03:48.891: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Ethernet1/0, blksize 1498
*Jan   9 23:03:48.891: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Ethernet1/0, blksize 1498.
*Jan   9 23:03:48.891: DNET-ADJ: Sending version 2.0 hellos to all end nodes on int Ethernet1/0, blksize 1498
*Jan   9 23:03:50.131: DNET-PKT: Packet fwded from 9.1023 to 1.13, via 61.1, snpa 0000.0000.0000, Tunnel0
*Jan   9 23:03:51.863: DNET-ADJ: Endnode hello from 9.2
*Jan   9 23:03:52.663: DNET-ADJ: Endnode hello from 9.22
*Jan   9 23:03:52.719: DNET-ADJ: Level 2   hello from 61.1
*Jan   9 23:03:52.723: DNET-ADJ: Level 2 (IV+) hello from 61.1.
*Jan   9 23:03:54.079: DNET-ADJ: Endnode hello from 9.11
*Jan   9 23:03:54.543: DNET-ADJ: Level 2   hello from 9.1
*Jan   9 23:03:55.131: DNET-PKT: Packet fwded from 9.1023 to 1.13, via 61.1, snpa 0000.0000.0000, Tunnel0
*Jan   9 23:03:55.543: DNET-ADJ: Level 2   hello from 9.1
*Jan   9 23:03:57.955: DNET-ADJ: Endnode hello from 9.14
*Jan   9 23:03:58.503: DNET: Sending level 2 routing updates on interface Tunnel0
*Jan   9 23:03:58.503: DNET: Sending level 1 routing updates on interface Ethernet1/0
*Jan   9 23:03:58.507: DNET: Sending level 2 routing updates on interface Ethernet1/0.
*Jan   9 23:04:00.131: DNET-PKT: Packet fwded from 9.1023 to 1.13, via 61.1, snpa 0000.0000.0000, Tunnel0
*Jan   9 23:04:01.583: DNET-ADJ: Endnode hello from 9.10
*Jan   9 23:04:02.087: DNET-ADJ: Endnode hello from 9.12
*Jan   9 23:04:02.723: DNET-ADJ: Endnode hello from 9.23
*Jan   9 23:04:03.879: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel0, blksize 1498
*Jan   9 23:04:03.879: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel0, blksize 1498
*Jan   9 23:04:03.887: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Tunnel1, blksize 1498
*Jan   9 23:04:03.887: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Tunnel1, blksize 1498
*Jan   9 23:04:03.891: DNET-ADJ: Sending version 2.0 hellos to all PhaseIV routers on int Ethernet1/0, blksize 1498
*Jan   9 23:04:03.895: DNET-ADJ: Sending version 2.1 hellos to all PhaseIV+ routers on int Ethernet1/0, blksize 1498.
*Jan   9 23:04:03.895: DNET-ADJ: Sending version 2.0 hellos to all end nodes on int Ethernet1/0, blksize 1498
*Jan   9 23:04:04.103: DNET-ADJ: Endnode hello from 9.8
*Jan   9 23:04:05.131: DNET-PKT: Packet fwded from 9.1023 to 1.13, via 61.1, snpa 0000.0000.0000, Tunnel0
*Jan   9 23:04:07.043: DNET-ADJ: Endnode hello from 9.2
*Jan   9 23:04:07.699: DNET-ADJ: Endnode hello from 9.22
*Jan   9 23:04:07.703: DNET-ADJ: Level 2   hello from 61.1
*Jan   9 23:04:07.723: DNET-ADJ: Level 2 (IV+) hello from 61.1.
Success rate is 0 percent (0/5)

That might help   can you do the same Dave?

  I can in a little while, but I'll have to find a way to do some filtering on that output.

                        -Dave

-- 
Dave McGuire, AK4HZ
New Kensington, PA

More information about the Hecnet-list mailing list