[HECnet] VT420 with a "worn out" display

[Brian Schenkenberger, VAXman-]

Cory Smelosky <b4 at gewt.net> writes:

On Fri, 4 Oct 2013, Brian Schenkenberger, VAXman- wrote:

Sampsa Laine <sampsa at mac.com> writes:


sampsa	<sampsa at mac.com>
mobile +358 40 7208932

On 4 Oct 2013, at 18:34, "Brian Schenkenberger, VAXman-" =
<system at TMESIS.COM> wrote:

Gregg Levine <gregg.drwho8 at gmail.com> writes:
=20
Hello!
Are there any other settings you can tweak? Especially since I
believe that place sitter might be CRT based, so there might be ones
for the contrast and bright. (Remember those? They were found on
classic SDTV sets.)
=20
There should be brightness and contrast controls on the right hand (as =
facing
the display) side of the terminal.
=20


Tried all those, no help.


There is one more on the board.   You may need an adjustment tool for it.
It's a small pot near the front and near the brightness and contrast knobs.


Does the VT320 have a similar pot for width and height?   The width and 
height are off on mine.

Inside on the board.   Google for the VT320 service guide and it should tell
you the alignment procedure.
-- 
VAXman- A Bored Certified VMS Kernel Mode Hacker       VAXman(at)TMESIS(dot)ORG

Well I speak to machines with the voice of humanity.