[HECnet] Problems getting decnet configured on IA64 VMS 8.4

[Robert Jarratt]

-----Original Message-----
From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
Behalf Of Mark Wickens
Sent: 06 April 2014 20:46
To: hecnet at Update.UU.SE
Subject: [HECnet] Problems getting decnet configured on IA64 VMS 8.4

Hi folks

I'm missing something here that will probably be obvious when pointed out.
Currently commissioning TSR2 (decnet 4.12) I'm having trouble copying the
known nodes database from MIM.
SIMVAX is also running and reporting good connectivity, so this isn't
bridge
related.

$ SHOW NETWORK

Product:   DECNET               Node:   TSR2                                 Address(es): 4.12
Product:   TCP/IP               Node:   tsr2.hecnet.eu             Address(es):
192.168.1.151

NCP>set node 1.13 name mim
%NCP-W-INVPVA, Invalid parameter value , Address

NCP>list circuit *


Known Circuit Permanent Summary as of   6-APR-2014 19:43:03

      Circuit                   State

    EWA-0                         on
    EWA-1                         on

NCP>list executor


Node Permanent Summary as of   6-APR-2014 19:43:54

Executor node = 4.12 (TSR2)

State                                       = on


Thanks, Mark.
--

      http://www.wickensonline.co.uk
      http://hecnet.eu
      http://declegacy.org.uk
      http://retrochallenge.net
      https://twitter.com/urbancamo


I think it means you already have a node defined at 1.13

Regards

Rob