[HECnet] Same MAC address on different nodes

[Johnny Billquist]

On 2014-05-24 12:11, Jean-Yves Bernier wrote:
Node 10.1

Line = QNA-0

      Controller = Normal
      Counter timer = Off
      Protocol = ETHERNET
      Hardware address = 08-00-2B-AA-BB-CC
      Controller CSR = 174440, Vector = 120
      Priority = 5


Node 10.2

Line = QNA-0

      Controller = Normal
      Counter timer = Off
      Protocol = ETHERNET
      Hardware address = 08-00-2B-AA-BB-CC
      Controller CSR = 174440, Vector = 120
      Priority = 5

Shouldn't be AA-00-04-00-01-28 and AA-00-04-00-02-28 ?

The line information tells you what the *hardware* MAC address is.
Try "SHOW EXEC STAT" instead. :-)

Both nodes under simh.

The network is working, however.

Is it required to SET XQ MAC to match node address?

I guess it might depend on the version of simh and host system.

	Johnny

-- 
Johnny Billquist                                   || "I'm on a bus
                                                                  ||   on a psychedelic trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" - B. Idol