[HECnet] RSX-11 booted!

[Johnny Billquist]

On 2014-05-24 11:39, Cory Smelosky wrote:
On Sat, 24 May 2014, Johnny Billquist wrote:

On 2014-05-24 11:24, Cory Smelosky wrote:
On Sat, 24 May 2014, Johnny Billquist wrote:



They can't conflict, first one of certain devices is set, rest are
floating?

Well, I was referring to the rules about how to assign CSRs in the
floating space.

Assigning them in the floating space is what confuses me. ;)

What devices do you have in the machine.
Let me know, and I'll give you the addresses.


DLV11-J, DHV11, DELQA, MSCP SCSI controller

All of those should fit at the standard addresses I believe.

Like I said. A DHV11 do not have a standard address. They only live in the floating space.
Anyway:
With this setup, the DHV11 should be at 160440.

But yes, for those devices that have a fixed address for the first
one, the first one is easy. :-)
(DHVs do not have a fixed address.)

What threw me off was that the DHV11's address in the manual was 22-bit
and SYSGEN wanted 18-bit. ;)

Really? I was pretty sure SYSGEN actually asks for 16 bits... :-)


Whoops.   16 felt too small to me so I assumed 18. ;)

IND only do 16-bit arithmetic. :-)

	Johnny

-- 
Johnny Billquist                                   || "I'm on a bus
                                                                  ||   on a psychedelic trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" - B. Idol