[HECnet] HILANT:: and GORVAX

[Kari Uusim ki]

First record your current settings by:

$ TCPIP SHOW SERVI TELNET /FULL

Then recreate the service like this (with your earlier settings except for the port):

$ TCPIP SET NOSERVI TELNET
$ TCPIP SET SERVI TELNET /PORT=2777/USER=TCPIP$TELNET/PROCESS=TCPIP$TELNET/FILE=TCPIP$SYSTEM:TCPIP$TELNET_RUN.COM/LOG=ALL
$ @SYS$STARTUP:TCPIP$TELNET_STARTUP.COM


Kari



On 12.5.2014 19:49, Sampsa Laine wrote:
I've tried about 1000 times but what is the correct TCPIP command to set
a service's port to something other than default (I want Telnet on 2777
and SSH on 2888).

Sampsa


On 12 May 2014, at 14:39, Sampsa Laine <sampsa at mac.com
<mailto:sampsa at mac.com>> wrote:

Guys,

I've FINALLY got around to setting up the bridge on my colo server
(gorilla.sampsa.com <http://gorilla.sampsa.com/>) and a PPTP tunnel
from HILANET to it.

Therefore HILANT should now be accessible through HECNET.

Also, for those of you without a static IP, I can offer a PPTP tunnel
on a 100 Mbps link with "fake" static IPs and a bridge connection for
anyone who is interested.

Sampsa