[HECnet] Re: Issues booting a satellite VAX/SIMH instance off AlphaVM-Free
Mark Wickens
mark at wickensonline.co.uk
Fri Dec 11 15:56:48 PST 2015
On Friday, 11 December 2015, Mark Pizzolato <Mark at infocomm.com> wrote:
> You don't mention the host OS??
>
Sorry, the Alpha is running OpenVMS 8.3 and the VAX is running 7.3.
> On Dec 11, 2015 10:04 AM, Mark Wickens <mark at wickensonline.co.uk
> <javascript:_e(%7B%7D,'cvml','mark at wickensonline.co.uk');>> wrote:
>
> Just thought I'd try and pick the brains of the collective wisdom if
> possible.
> I had a networking performance issue with AlphaVM-Free (poor ping rates
> and sluggish network performance) that has kindly been solved by Artem in
> the latest release and therefore my attention turns to the issue with a VAX
> satellite node network booting off the AlphaVM-Free instances (which I can
> no longer attribute to the same performance issue).
>
> Back in the 'real world' the boxes that supported this configuration were
> an AlphaServer 1000/A and a VAXstation 4000/60. In the emulated world they
> are now an AlphaVM-Free instance and a SIMH instance, both running on an HP
> DL380 Gen 5 with 6 x GB network adapters. Each of the emulated instances is
> mapped to a different physical network card.
>
> When I attempt to boot the emulated VAX from its' network adapter I get
> the following console messages. Boot appears to proceed but it is glacial.
> In the past I've given up long before ever receiving a login prompt on the
> VAX instance.
>
> Does anyone have experience with this kind of issue? It doesn't look like
> the emulated Alpha network adapter on the AlphaVM instance thinks that it
> is experiencing errors based on the output below.
>
> Thanks, Mark.
>
> %<------------------------- VAX console log
>
> Connected to the MicroVAX 3900 simulator CON-TEL device
>
>
>
> KA655X-B V5.3, VMB 2.7
> Performing normal system tests.
> 40..39..38..37..36..35..34..33..32..31..30..29..28..27..26..25..
> 24..23..22..21..20..19..18..17..16..15..14..13..12..11..10..09..
> 08..07..06..05..04..03..
> Tests completed.
> >>>boot
> (BOOT/R5:0 XQA0
>
>
>
> 2..
> -XQA0
> 1..0..
>
>
> %VAXcluster, system loaded from node SLAVE (AA-00-04-00-F9-10)
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server
>
> %SYSBOOT-I-SYSBOOT Mapping the SYSDUMP.DMP on the System Disk
> %SYSBOOT-I-SYSBOOT SYSDUMP.DMP on System Disk successfully mapped
> %SYSBOOT-I-SYSBOOT Mapping PAGEFILE.SYS on the System Disk
> %SYSBOOT-I-SYSBOOT SAVEDUMP parameter not set to protect the PAGEFILE.SYS
> OpenVMS (TM) VAX Version V7.3 Major version id = 1 Minor version id
> = 0
> %VAXcluster, no connection to disk server
> %VAXcluster, no connection to disk server SLAVE
> %VAXcluster, attempting to reconnect to a disk server
> %VAXcluster, no connection to disk server
> %VAXcluster, attempting to reconnect to a disk server
> %VAXcluster, connected to disk server SLAVE
> %WBM-I-WBMINFO Write Bitmap has successfully completed initialization.
>
>
>
> %<------------------------- Alpha console log
>
> %%%%%%%%%%% OPCOM 11-DEC-2015 17:45:34.47 %%%%%%%%%%%
> Message from user DECNET on SLAVE
> DECnet event 0.3, automatic line service
> From node 4.249 (SLAVE), 11-DEC-2015 17:45:34.47
> Circuit EWA-0, Load, Requested, Node = 4.259 (ALEPH)
> File = ALEPHSYSTEM$:[SYS0.], Operating system, Ethernet address =
> 08-00-2B-2C-20
> -6E
>
>
> %%%%%%%%%%% OPCOM 11-DEC-2015 17:46:01.70 %%%%%%%%%%%
> Message from user DECNET on SLAVE
> DECnet event 0.3, automatic line service
> From node 4.249 (SLAVE), 11-DEC-2015 17:46:01.70
> Circuit EWA-0, Load, Successful, Node = 4.259 (ALEPH)
> File = ALEPHSYSTEM$:[SYS0.], Operating system, Ethernet address =
> 08-00-2B-2C-20
> -6E
>
>
> Username:
> %PEA0, Port has Closed Virtual Circuit - REMOTE NODE ALEPH
>
> Username:
> %PEA0, Port has Closed Virtual Circuit - REMOTE NODE ALEPH
>
> Username:
> %PEA0, Port has Closed Virtual Circuit - REMOTE NODE ALEPH
>
> Username: system
> Password:
>
> 01010011 01001100 01000001 01010110 01000101
>
> +-+-+-+-+-+
> |S|L|A|V|E|
> +-+-+-+-+-+
>
> Welcome to SLAVE running OpenVMS AXP 8.3
> SLAVE is a member of the HALO Cluster
> Strictly non-commercial use only
> Documentation is available at http://hpm.hecnet.eu/wiki/
>
> Last interactive login on Friday, 11-DEC-2015 17:38:17.57
> Last non-interactive login on Friday, 11-DEC-2015 17:44:08.37
> SLAVE$$ show device pea0:/full
>
> Device PEA0:, device type NI_SCA, is online, shareable, error logging is
> enabled.
>
> Error count 576 Operations completed
> 0
> Owner process "" Owner UIC
> [SYSTEM]
> Owner process ID 00000000 Dev Prot
> S:RWPL,O:RWPL,G,W
> Reference count 0 Default buffer size
> 0
> Current preferred CPU Id 0 Fastpath
> 1
>
> SLAVE$$ mcr ncp show known lines count
>
>
> Known Line Counters as of 11-DEC-2015 17:51:28
>
> Line = EWA-0
>
> 654 Seconds since last zeroed
> 6522 Data blocks received
> 2589 Multicast blocks received
> 0 Receive failure
> 655620 Bytes received
> 372627 Multicast bytes received
> 0 Data overrun
> 3341 Data blocks sent
> 335 Multicast blocks sent
> 0 Blocks sent, multiple collisions
> 0 Blocks sent, single collision
> 0 Blocks sent, initially deferred
> 1529780 Bytes sent
> 42723 Multicast bytes sent
> 0 Send failure
> 0 Collision detect check failure
> 0 Unrecognized frame destination
> 0 System buffer unavailable
> 5 User buffer unavailable
>
>
> SLAVE$$
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20151211/31097919/attachment-0001.html>
More information about the Hecnet-list
mailing list