[HECnet] Hecnet Peering

Johnny Billquist bqt at softjar.se
Fri Jan 2 08:11:14 PST 2015


I just checked some more. I can reach BENDER:: (12,2), so based on that, HUB:: would appear to run correctly.
(HUB:: is supposedly my next hop going to BENDER::)

BENDER:: seems to be running Phase V (I suspect), as I can't really speak NICE to it, but PHONE worked fine.

Not sure what the problem going to area 22 would be then...

	Johnny

On 2015-01-02 16:32, Mark Darvill wrote:
Hi Tim,

DECnet on this test system is just Decnet IV running on VMS 7.3.

I can   t do a loop node to 12.1023 but not sure that would work anyway if
it is a cisco.

Also can   t seem to get to 12.2. Have just rebooted 22.10 as SIMH may
have crashed.

Mark


On 2 Jan 2015, at 15:15, Tim Sneddon <tim at sneddon.id.au
<mailto:tim at sneddon.id.au>> wrote:

On Fri, Jan 2, 2015 at 6:16 PM, Mark Darvill<mark.darvill at mac.com
<mailto:mark.darvill at mac.com>>wrote:

      HI,

      I have been playing with my cisco router and a SIMH Vax over the
      break.

      from my router I can see the following neighbours

      cmrtr01#show decnet nei
      Net Node         Interface                       MAC address       Flags
      0     12.1023   Tunnel57                         0000.0000.0000 A
      0     42.1022   Tunnel51                         0000.0000.0000 A
      0     61.1023   Tunnel53                         0000.0000.0000 A
      0     22.10       FastEthernet0/1           aa00.0400.0a58 V

      and the following routes

      cmrtr01#show decnet route
      Area             Cost   Hops                     Next Hop to Node             Expires   Prio
      *1                       50         2                       Tunnel51 -> 42.1022
      *2                       52         4                       Tunnel51 -> 42.1022
      *3                       51         3                       Tunnel51 -> 42.1022
      *7                       50         2                       Tunnel51 -> 42.1022
      *8                       50         2                       Tunnel51 -> 42.1022
      *9                       40         2                       Tunnel57 -> 12.1023
      *11                     50         2                       Tunnel51 -> 42.1022
      *12                     20         1                       Tunnel57 -> 12.1023             44
      64   A+
      *18                     51         3                       Tunnel51 -> 42.1022
      *19                     50         2                       Tunnel51 -> 42.1022
      *22                       0         0                         (Local) -> 22.100
      *23                     40         2                       Tunnel53 -> 61.1023
      *28                     50         2                       Tunnel51 -> 42.1022
      *33                     51         3                       Tunnel51 -> 42.1022
      *39                     51         3                       Tunnel51 -> 42.1022
      *42                     20         1                       Tunnel51 -> 42.1022             45
      64   A+
      *47                     50         2                       Tunnel51 -> 42.1022
      *59                     50         2                       Tunnel51 -> 42.1022
      *61                     20         1                       Tunnel53 -> 61.1023             38
      64   A+
      Node             Cost   Hops                     Next Hop to Node             Expires   Prio
      *(Area)               0         0                         (Local) -> 22.100
      *22.10                 4         1         FastEthernet0/1 -> 22.10                 33
      64   V
      *22.100               0         0                         (Local) -> 22.100

      My SIMH Vax can see my router and has an adjacency. My node is
      22.10 and router 22.100

      Can anyone see area 22 as I don   t seem to be able to communicate
      elsewhere.


Hi Mark,

My network is 12, your Tunnel57 hooks into my router.   From my router
I am able to ping 22.100, but I cannot reach 22.10. Are you able to
hit my router (12.1023) or my VAX (12.2)?   Which version of DECnet are
you running on 22.10?

I am happy to help you figure out what might be going on.

Regards, Tim.



-- 
Johnny Billquist                                   || "I'm on a bus
                                                                  ||   on a psychedelic trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" - B. Idol



More information about the Hecnet-list mailing list