[HECnet] dec repeater 90ts
pechter at gmail.com
pechter at gmail.com
Sun Dec 4 08:13:19 PST 2016
Usually no connection - from my old Field Service days.
Sent from my android device.
-----Original Message-----
From: john connor <dophini at dir.bg>
To: hecnet at Update.UU.SE
Sent: Sun, 04 Dec 2016 9:28 AM
Subject: Re: [HECnet] dec repeater 90ts
Thanks guys
just question 6 pin is N/C what that mean? GND is ground but what is N/C
and guys does anybody have bn24h rj45-mmj crossover cable to manage this equipment with console? i will buy it.
thanks,
VaxCavalera
> 4 дек. 2016 г., в 13:46, Rob Jarratt <robert.jarratt at ntlworld.com> написал(а):
>
> And I should point out that my notes came originally from Mark Wickens.
>
> Regards
>
> Rob
>
>> -----Original Message-----
>> From: owner-hecnet at Update.UU.SE [mailto:owner-
>> hecnet at Update.UU.SE] On Behalf Of Rob Jarratt
>> Sent: 04 December 2016 10:13
>> To: hecnet at Update.UU.SE
>> Subject: RE: [HECnet] dec repeater 90ts
>>
>> It seems that the PSUs often fail, test it with a multimeter. If it is the
> PSU,
>> here are my notes on how to make your own mini-DIN PSU connector for a
>> 90M:
>>
>> Pin Output
>> -------------------
>> 1 +5V
>> 2 GND
>> 3 +5V
>> 4 GND
>> 5 +5V
>> 6 N/C
>> 7 GND
>> Shield Tied to chassis ground
>>
>>
>>
>> 5 6 7
>> o o o
>>
>> 3 o [x] o 4
>>
>> o o
>> 1 2
>>
>> Connector physical pinout looking into the connector on end of cable.
>>
>> Regards
>>
>> Rob
>>
>>> -----Original Message-----
>>> From: owner-hecnet at Update.UU.SE [mailto:owner-
>> hecnet at Update.UU.SE] On
>>> Behalf Of john connor
>>> Sent: 04 December 2016 05:34
>>> To: hecnet at Update.UU.SE
>>> Subject: [HECnet] dec repeater 90ts
>>>
>>> Hi,
>>>
>>> does anybody have schema for dec repeater 90ts and psu h7082-ab for
>>> standalone work for this repeater
>>>
>>> seems mine repeater died or psu died, need to check
>>>
>>> also how this jack 7pin on psu called and what is signal scheme for
>>> this
>> jack
>>>
>>> thanks in advance,
>>> Serg aka VaxCavalera
>>>
>>>> 26 нояб. 2016 г., в 23:36, Sampsa Laine <sampsa at mac.com> написал(а):
>>>>
>>>>
>>>>> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-
>>> <system at TMESIS.COM> wrote:
>>>>>
>>>>> G. <gerry77 at mail.com> writes:
>>>>>
>>>>>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote:
>>>>>>>
>>>>>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote
>>>>>>> host and=
>>>>>> username of=20
>>>>>>> someone logged into my system over DECNET? I=E2=80=99m writing
>> a
>>>>>>> script=
>>>>>> that needs=20
>>>>>>> the host + username of the person connecting to a captive account..
>>>>>>
>>>>>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D
>>>>>> F$ELEMENT(0,":",REMPORT) REMUSER =3D
>> F$ELEMENT(2,":",REMPORT)
>>>>>
>>>>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID?
>>>>>
>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'"
>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'"
>>>>
>>>>
>>>> That does look a lot simpler! Thanks.
>>>>
>>>> Sampsa
>>>>
>>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20161204/a832870a/attachment-0001.html>
More information about the Hecnet-list
mailing list