[HECnet] [SOLVED] Re: DECnet for Ultrix 4.0/VAX PAK?
supratim at riseup.net
supratim at riseup.net
Wed Sep 20 16:26:57 PDT 2017
Never mind, found one on the internet. All good. Shoot an email if
anyone wants it.
# uname -a
ULTRIX ostara 4.0 0 VAX
# /usr/bin/ncp
ncp>show exec summ
Executor Volatile Summary as of Thu Sep 20 23:26:14 WET 1990
Executor node = 1.555 (OSTARA)
State = On
Identification = SANYALNET ULTRIX VAX 4.0 WASHDC
ncp>
ncp>show known circ
Known Circuit Volatile Summary as of Thu Sep 20 23:26:22 WET 1990
Circuit State Loopback Adjacent
Name Node
QNA-1 On 1.559
(IMPVAX)
ncp>exit
#
Thanks.
On 2017-09-20 18:59, supratim at riseup.net wrote:
> It happily registers something called "DRV1W-ULTRIX-VAX" which is
> probably not DECnet?
>
> # lmf list
> Product Status Users: Total
> Active
>
> DRV1W-ULTRIX-VAX active unlimited
> ULTRIX active 2 1
>
>
>
> On 2017-09-20 18:50, Tony Blews wrote:
>> um run the .sh first i think.
>>
>> On Wed, Sep 20, 2017 at 11:49 PM, <supratim at riseup.net> wrote:
>>
>>> Hi,
>>>
>>> What is the usual way to get around this PAK requirement for DECnet
>>> on
>>> Ultrix 4.0 VAX?
>>>
>>> ***************** W A R N I N G ********************
>>> * *
>>> * You have NOT registered the DECnet-ULTRIX License !! *
>>> * You will not be able to perform any remote access *
>>> * through DECnet-ULTRIX. *
>>> * *
>>> * In order to do remote access, use the lmf utility to *
>>> * register a licensed DECnet-ULTRIX PAK. *
>>> * *
>>> **********************************************************
>>>
>>> Thanks,
>>> Supratim
More information about the Hecnet-list
mailing list