[HECnet] Sunlink DNA

Thu Sep 20 17:33:21 PDT 2018

Excellent! I'll probably go look in the main Makefile and correct the
ieee754 library install to happen earlier on, to avoid this error.

Have fun,
Mark

On Thu, Sep 20, 2018 at 5:26 PM, Ray Jewhurst <raywjewhurst at gmail.com>
wrote:

> Mark,
> It worked like a charm.  Thanks.  Now the fun begins!
>
> Thanks again,
>
> Ray
>
> On Thu, Sep 20, 2018 at 8:19 PM, Mark Abene <phiber at phiber.com> wrote:
>
>> Oddly enough, I did have that happen on one install but not another. Try
>> this:
>>
>> cd $HOME/tme/tme-0.8/ic/ieee754
>> make install
>>
>> ...and if that works, try 'make install' again from the main tme-0.8
>> directory.
>> I suspect some things in the install might be occurring out of order.
>>
>> -Mark
>>
>>
>>
>> On Thu, Sep 20, 2018 at 5:13 PM, Ray Jewhurst <raywjewhurst at gmail.com>
>> wrote:
>>
>>> Mark,
>>> I followed your instructions to a "T" and it built fine but I got the
>>> following errors on the install.
>>>
>>> /usr/bin/x86_64-linux-gnu-ld: cannot find -ltme-ieee754
>>> collect2: error: ld returned 1 exit status
>>> libtool: install: error: relink `tme_ic_m68k.la' with the above command
>>> before installing it
>>> Makefile:312: recipe for target 'install-pkglibLTLIBRARIES' failed
>>> make[4]: *** [install-pkglibLTLIBRARIES] Error 1
>>> make[4]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
>>> Makefile:470: recipe for target 'install-am' failed
>>> make[3]: *** [install-am] Error 2
>>> make[3]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
>>> Makefile:464: recipe for target 'install' failed
>>> make[2]: *** [install] Error 2
>>> make[2]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
>>> Makefile:612: recipe for target 'install-recursive' failed
>>> make[1]: *** [install-recursive] Error 1
>>> make[1]: Leaving directory '/home/ray/tme-0.8/ic'
>>> Makefile:315: recipe for target 'install-recursive' failed
>>> make: *** [install-recursive] Error 1
>>>
>>> I also am also running Ubuntu 18.04.
>>>
>>> Thanks in advance,
>>>
>>> Ray
>>>
>>> On Thu, Sep 20, 2018 at 5:02 PM, Mark Abene <phiber at phiber.com> wrote:
>>>
>>>> I posted this message yesterday, but for some reason people are telling
>>>> me it never went to the list.
>>>> I removed the photos I originally attached and am sending it again.
>>>>
>>>> -Mark
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: Mark Abene <phiber at phiber.com>
>>>> Date: Wed, Sep 19, 2018 at 2:58 PM
>>>> Subject: Re: [HECnet] Sunlink DNA
>>>> To: hecnet at update.uu.se
>>>>
>>>>
>>>> To everyone who asked, I built TME last night on Ubuntu 18.04 on two
>>>> different systems, and installed NetBSD 1.6.2 on a sun3/160 instance.
>>>> It's working very nicely, minus networking; bear in mind that TME was
>>>> originally written to run on a NetBSD host (it's in the pkg collection),
>>>> and makes use of BPF to implement networking (I seem to remember it also
>>>> working on FreeBSD). Linux does have a bpf compatibility interface, so I'll
>>>> see if it can be made to work and follow up with you all. That said, grab
>>>> TME here: https://people.csail.mit.edu/fredette/tme/tme-0.8.tar.gz
>>>> That's the home site, there's lots of info on the emulator
>>>> https://people.csail.mit.edu/fredette/tme/
>>>> There's also this site, specifically about installing SunOS 4.1.1:
>>>> http://www.abiyo.net/retrocomputing/installingsunos41
>>>> 1tosun3emulatedintme08onlinux
>>>> DON'T follow those build instructions, they're incredibly old and will
>>>> get you nowhere fast.  :)
>>>>
>>>> Here are my steps:
>>>> Make sure you have the gtk-2.0 and glib2.0 dev packages installed.
>>>> Then...
>>>> mkdir $HOME/tme
>>>> cd $HOME/tme
>>>> tar -zxvf your_download_dir/tme-0.8.tar.gz
>>>> cd tme-0.8
>>>> vi libtme/module.c (comment out line 93 "LTDL_SET_PRELOADED_SYMBOLS();",
>>>> it's no longer needed) and save.
>>>> ./configure --prefix=$HOME/tme --disable-warnings 'LIBS=-lglib-2.0
>>>> -lgtk-x11-2.0 -lX11'
>>>> export LTDL_LIBRARY_PATH=$HOME/tme/lib (or "setenv LTDL_LIBRARY_PATH
>>>> $HOME/tme/lib" for csh/tcsh)
>>>> make
>>>> make install
>>>>
>>>> If everything built and installed without errors, you'll have the
>>>> install tree in $HOME/tme. From here you can follow the various
>>>> instructions on the original site above for installing NetBSD, etc.
>>>>
>>>> If you ran into any errors either building, installing, or running,
>>>> just drop me a note, I'd be happy to help!
>>>>
>>>> P.S.: I've attached some photos of it booting up!
>>>> P.P.S: You'll notice it seg fault when you exit tmesh. The original
>>>> does this too. The author even comments about how there's no "quit" command.
>>>>
>>>> Regards,
>>>> Mark
>>>>
>>>>
>>>>
>>>> On Tue, Sep 18, 2018 at 6:35 PM, Dave McGuire <mcguire at neurotica.com>
>>>> wrote:
>>>>
>>>>>
>>>>>   Thanks Mark!
>>>>>
>>>>>        -Dave
>>>>>
>>>>> On 09/18/2018 08:59 PM, Mark Abene wrote:
>>>>> > Absolutely. I'll dig it out after dinner later tonight.
>>>>> >
>>>>> > -Mark
>>>>> >
>>>>> >
>>>>> > On Tue, Sep 18, 2018 at 5:44 PM, Dave McGuire <mcguire at neurotica.com
>>>>> > <mailto:mcguire at neurotica.com>> wrote:
>>>>> >
>>>>> >     On 09/18/2018 08:12 PM, Mark Abene wrote:
>>>>> >     > The TME emulator works fine on Ubuntu with very minor
>>>>> massaging. I don't
>>>>> >     > recall having to do anything extremely out of the ordinary.
>>>>> >     > For me the fun was in emulating a Sun 3/80 I used to have. If
>>>>> you like,
>>>>> >     > I can dig it up my TME install. Haven't used it in a while.
>>>>> >
>>>>> >       If you can find any notes that you my have taken on what it
>>>>> took to
>>>>> >     get it running, I'd very much appreciate that.  I hacked on it
>>>>> for a bit
>>>>> >     earlier this year, but ran out of time and eventually gave up.
>>>>> >
>>>>> >                   -Dave
>>>>> >
>>>>> >     --
>>>>> >     Dave McGuire, AK4HZ
>>>>> >     New Kensington, PA
>>>>> >
>>>>> >
>>>>>
>>>>>
>>>>> --
>>>>> Dave McGuire, AK4HZ
>>>>> New Kensington, PA
>>>>>
>>>>
>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20180920/7571bcd9/attachment.html>