[HECnet] Sunlink DNA
Supratim Sanyal
supratim at riseup.net
Wed Sep 26 22:17:23 PDT 2018
Thank you Mark. I have NetBSD/sun3 (Amnesiac) up and running on Ubuntu
14 32-bit; your instructions are perfect!
Supratim
On 9/20/2018 20:19, Mark Abene wrote:
> Oddly enough, I did have that happen on one install but not another.
> Try this:
>
> cd $HOME/tme/tme-0.8/ic/ieee754
> make install
>
> ...and if that works, try 'make install' again from the main tme-0.8
> directory.
> I suspect some things in the install might be occurring out of order.
>
> -Mark
>
>
>
> On Thu, Sep 20, 2018 at 5:13 PM, Ray Jewhurst <raywjewhurst at gmail.com
> <mailto:raywjewhurst at gmail.com>> wrote:
>
> Mark,
> I followed your instructions to a "T" and it built fine but I got
> the following errors on the install.
>
> /usr/bin/x86_64-linux-gnu-ld: cannot find -ltme-ieee754
> collect2: error: ld returned 1 exit status
> libtool: install: error: relink `tme_ic_m68k.la
> <http://tme_ic_m68k.la>' with the above command before installing it
> Makefile:312: recipe for target 'install-pkglibLTLIBRARIES' failed
> make[4]: *** [install-pkglibLTLIBRARIES] Error 1
> make[4]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
> Makefile:470: recipe for target 'install-am' failed
> make[3]: *** [install-am] Error 2
> make[3]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
> Makefile:464: recipe for target 'install' failed
> make[2]: *** [install] Error 2
> make[2]: Leaving directory '/home/ray/tme-0.8/ic/m68k'
> Makefile:612: recipe for target 'install-recursive' failed
> make[1]: *** [install-recursive] Error 1
> make[1]: Leaving directory '/home/ray/tme-0.8/ic'
> Makefile:315: recipe for target 'install-recursive' failed
> make: *** [install-recursive] Error 1
>
> I also am also running Ubuntu 18.04.
>
> Thanks in advance,
>
> Ray
>
> On Thu, Sep 20, 2018 at 5:02 PM, Mark Abene <phiber at phiber.com
> <mailto:phiber at phiber.com>> wrote:
>
> I posted this message yesterday, but for some reason people
> are telling me it never went to the list.
> I removed the photos I originally attached and am sending it
> again.
>
> -Mark
>
> ---------- Forwarded message ----------
> From: *Mark Abene* <phiber at phiber.com <mailto:phiber at phiber.com>>
> Date: Wed, Sep 19, 2018 at 2:58 PM
> Subject: Re: [HECnet] Sunlink DNA
> To: hecnet at update.uu.se <mailto:hecnet at update.uu.se>
>
>
> To everyone who asked, I built TME last night on Ubuntu 18.04
> on two different systems, and installed NetBSD 1.6.2 on a
> sun3/160 instance.
> It's working very nicely, minus networking; bear in mind that
> TME was originally written to run on a NetBSD host (it's in
> the pkg collection), and makes use of BPF to implement
> networking (I seem to remember it also working on FreeBSD).
> Linux does have a bpf compatibility interface, so I'll see if
> it can be made to work and follow up with you all. That said,
> grab TME here:
> https://people.csail.mit.edu/fredette/tme/tme-0.8.tar.gz
> <https://people.csail.mit.edu/fredette/tme/tme-0.8.tar.gz>
> That's the home site, there's lots of info on the emulator
> https://people.csail.mit.edu/fredette/tme/
> <https://people.csail.mit.edu/fredette/tme/>
> There's also this site, specifically about installing SunOS
> 4.1.1:
> http://www.abiyo.net/retrocomputing/installingsunos411tosun3emulatedintme08onlinux
> <http://www.abiyo.net/retrocomputing/installingsunos411tosun3emulatedintme08onlinux>
> DON'T follow those build instructions, they're incredibly old
> and will get you nowhere fast. :)
>
> Here are my steps:
> Make sure you have the gtk-2.0 and glib2.0 dev packages
> installed. Then...
> mkdir $HOME/tme
> cd $HOME/tme
> tar -zxvf your_download_dir/tme-0.8.tar.gz
> cd tme-0.8
> vi libtme/module.c (comment out line 93
> "LTDL_SET_PRELOADED_SYMBOLS();", it's no longer needed) and save.
> ./configure --prefix=$HOME/tme --disable-warnings
> 'LIBS=-lglib-2.0 -lgtk-x11-2.0 -lX11'
> export LTDL_LIBRARY_PATH=$HOME/tme/lib (or "setenv
> LTDL_LIBRARY_PATH $HOME/tme/lib" for csh/tcsh)
> make
> make install
>
> If everything built and installed without errors, you'll have
> the install tree in $HOME/tme. From here you can follow the
> various instructions on the original site above for installing
> NetBSD, etc.
>
> If you ran into any errors either building, installing, or
> running, just drop me a note, I'd be happy to help!
>
> P.S.: I've attached some photos of it booting up!
> P.P.S: You'll notice it seg fault when you exit tmesh. The
> original does this too. The author even comments about how
> there's no "quit" command.
>
> Regards,
> Mark
>
>
>
> On Tue, Sep 18, 2018 at 6:35 PM, Dave McGuire
> <mcguire at neurotica.com <mailto:mcguire at neurotica.com>> wrote:
>
>
> Thanks Mark!
>
> -Dave
>
> On 09/18/2018 08:59 PM, Mark Abene wrote:
> > Absolutely. I'll dig it out after dinner later tonight.
> >
> > -Mark
> >
> >
> > On Tue, Sep 18, 2018 at 5:44 PM, Dave McGuire
> <mcguire at neurotica.com <mailto:mcguire at neurotica.com>
> > <mailto:mcguire at neurotica.com
> <mailto:mcguire at neurotica.com>>> wrote:
> >
> > On 09/18/2018 08:12 PM, Mark Abene wrote:
> > > The TME emulator works fine on Ubuntu with very
> minor massaging. I don't
> > > recall having to do anything extremely out of the
> ordinary.
> > > For me the fun was in emulating a Sun 3/80 I used
> to have. If you like,
> > > I can dig it up my TME install. Haven't used it in
> a while.
> >
> > If you can find any notes that you my have taken
> on what it took to
> > get it running, I'd very much appreciate that. I
> hacked on it for a bit
> > earlier this year, but ran out of time and
> eventually gave up.
> >
> > -Dave
> >
> > --
> > Dave McGuire, AK4HZ
> > New Kensington, PA
> >
> >
>
>
> --
> Dave McGuire, AK4HZ
> New Kensington, PA
>
>
>
>
>
--
Sent via Thunderbird for Windows 10 on Lenovo Legion Y720
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20180927/26703e16/attachment-0001.html>
More information about the Hecnet-list
mailing list