[HECnet] DECnet Phase-V usage within HECnet

[Johnny Billquist]

Just pointing out the silly obvious here - HECnet is for large parts 
running DECnet over IP, and is purely Phase IV... Just saying...

   Johnny

On 2019-02-18 22:18, Kari Uusimäki wrote:
> There are some services available on Phase V which aren't on Phase IV 
> like DECnet-over-IP, DTSS and a few others. If you like to use those, 
> then Phase V is your choice.
> Personally I use Phase V on most Alphas and on bigger VAXen. Others run 
> Phase IV.
> 
> 
> Kari
> 
> 
> Sent from Samsung tablet.
> 
> 
> -------- Original message --------
> From: Steve Davidson <steve at davidson.net>
> Date: 2/18/19 18:42 (GMT+02:00)
> To: HECnet Distribution List <hecnet at Update.UU.SE>
> Subject: [HECnet] DECnet Phase-V usage within HECnet
> 
> Anyone using DECnet Phase-V on VAX/VMS V7.3 in the HECnet community?
> 
> I am rebuilding SGC::.  It is MUCH bigger and faster so I may go the 
> Phase-V route if it has any real value.  Comments?
> 
> Thanks!
> 
> -Steve


-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt at softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol