[HECnet] More DECnet/E items --> NI1D:: not active --> wrong node address in database but resource problem --> VMS ok without logical

[Johnny Billquist]

I think the change of numbers happened quite some while ago by now. When 
Paul initially hooked up to HECnet, I think he was in area 9, before 
moving to his own area. I no longer even remember when that happened.

The nodename database gets changes and updates somewhat often, so it 
makes sense to get a new copy once in a while.

   Johnny

On 2020-06-30 23:15, R. Voorhorst wrote:
> Yes, that does the trick on VMS as well, thanks.
> 
> 	SWBV55> cop ni1d::ncp.tsk my:
> 	%COPY-S-COPIED, NI1D::SY:[200,200]NCP.TSK copied to
> MYD:[000000]NCP.TSK;1 (261 blocks)
> 
> Did the NI1D change from 9.55 to 41.2 some time ago?
> Refreshed the database from Mim, so should be up to date again ...
> 
> Reindert
> 
> -----Original Message-----
> From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On Behalf
> Of Paul Koning
> Sent: Tuesday, 30 June, 2020 23:05
> To: hecnet at update.uu.se
> Subject: Re: [HECnet] More DECnet/E items --> NI1D:: not active --> wrong
> node address in database but resource problem --> VMS
> 
> As I said, for some reason it won't access decnet$: for this.  Remove the
> decnet$: from the file name, so just ni1d::ncp.tsk etc. then it works.
> 
> 	paul
> 
> 
>> On Jun 30, 2020, at 5:03 PM, R. Voorhorst <R.Voorhorst at swabhawat.com>
> wrote:
>>
>> SWBV55> copy ni1d::decnet$:evtlog.tsk my:
>> %COPY-E-OPENIN, error opening NI1D::_SY:[0,16]EVTLOG.TSK as input
>> -RMS-E-ACC, ACP file access failed -SYSTEM-F-REMRSRC, insufficient
>> system resources at remote node
>> SWBV55> exnb ni1d::decnet$:evtlog.tsk my:
>> %EXCHANGE-E-OPENIN, error opening NI1D::_SY:[0,16]EVTLOG.TSK as input
>> -RMS-E-ACC, ACP file access failed -SYSTEM-F-REMRSRC, insufficient
>> system resources at remote node
>>
>> Stubborn it is. OpenVMS 7.3
>>
>> Reindert
>>
>> -----Original Message-----
>> From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
>> Behalf Of Johnny Billquist
>> Sent: Tuesday, 30 June, 2020 22:58
>> To: hecnet at Update.UU.SE
>> Subject: Re: [HECnet] More DECnet/E items --> NI1D:: not active -->
>> wrong node address in database but resource problem
>>
>>  From MIM::
>>
>> .ncp tell ni1d sho exec
>>
>> Node summary as of 30-JUN-20 22:56:57
>>
>> Executor node = 41.2 (NI1D)
>>
>>     State = On, Identification = DECnet/E V4.1
>>     Active links = 2
>>
>> .nft ni1d::/li
>>
>>
>> Directory NI1D::_SY:[200,200]
>> 30-JUN-20 22:57:35
>>
>> INFO.TXT                1./16.             03-JUL-19 13:17:00
>> NCP.TSK                 261./320.       C  30-JUN-20 10:08:00
>> EVTLOG.TSK              111./112.       C  30-JUN-20 10:08:00
>>
>> Total of 373./448. Blocks in 3. Files
>>
>> Weird...
>>
>>    Johnny
>>
>> On 2020-06-30 22:56, R. Voorhorst wrote:
>>> L.S.
>>>
>>> SWBV55> dir ni1d::decnet$:evtlog.tsk
>>> %DIRECT-E-OPENIN, error opening NI1D::DECNET$:EVTLOG.TSK;* as input
>>> -RMS-E-FND, ACP file or directory lookup failed -SYSTEM-F-REMRSRC,
>>> insufficient system resources at remote node
>>>
>>> Reboot, Paul?
>>>
>>> Reindert
>>>
>>> -----Original Message-----
>>> From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
>>> Behalf Of R. Voorhorst
>>> Sent: Tuesday, 30 June, 2020 22:51
>>> To: hecnet at Update.UU.SE
>>> Subject: RE: [HECnet] More DECnet/E items --> NI1D:: not active
>>>
>>> L.S.
>>>
>>> I do not see node NI1D on hecnet active ....
>>>
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: owner-hecnet at Update.UU.SE [mailto:owner-hecnet at Update.UU.SE] On
>>> Behalf Of Paul Koning
>>> Sent: Tuesday, 30 June, 2020 22:42
>>> To: hecnet at update.uu.se
>>> Subject: Re: [HECnet] More DECnet/E items
>>>
>>>
>>>
>>>> On Jun 30, 2020, at 4:09 PM, Wilm Boerhout <wboerhout at gmail.com> wrote:
>>>>
>>>> Paul Koning schreef op 30-6-2020 om 18:59:
>>>>> Good idea.  You can copy them from the system where I built them,
>>>>> from
>>> NI1D::DECNET$: .
>>>>>
>>>>> 	paul
>>>>>
>>>> [snip]
>>>>
>>>> Trying from PIRSTS::, both files appear to be protected against copy
>>>>
>>>> $ nft copy ni1d::decnet$:evtlog.tsk
>>>>            Node: NI1D
>>>>            User:
>>>>        Password:
>>>> System Password:
>>>> %File NI1D::DECNET$:EVTLOG.TSK is protected, skipping
>>>>
>>>> $ nft copy ni1d::decnet$:ncp.tsk
>>>>            Node: NI1D
>>>>            User:
>>>>        Password:
>>>> System Password:
>>>> %File NI1D::DECNET$:NCP.TSK is protected, skipping
>>>>
>>>> *Wilm*
>>>
>>> That is very strange.  I wonder why it does that.
>>>
>>> Anyway, I moved them both to the default account, so try the copy
>>> again with just ni1d::evtlog.tsk and ni1d::ncp.tsk as the input
> arguments.
>>>
>>> 	paul
>>>
>>
>>
>> -- 
>> Johnny Billquist                  || "I'm on a bus
>>                                    ||  on a psychedelic trip
>> email: bqt at softjar.se             ||  Reading murder books
>> pdp is alive!                     ||  tryin' to stay hip" - B. Idol
>>
> 

-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt at softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol