[HECnet] Bringing up a MicroVAX 3100-80
Supratim Sanyal
supratim at riseup.net
Mon Mar 30 14:51:21 PDT 2020
MMJ to Serial adapter arrived today, and I now have console access via
minicom on a Linux PC.
DKA100 is inside the MicroVAX and DKA200 is in the StorageWorks. Neither
is straightaway bootable.
What is the recommended way to recover from "FILNOTCNTG" error?
KA47-A V1.2-343-V4.0
08-00-2B-2D-FF-39
24MB
?? 001 9 NI 0172
?? 100 10 SCSI 0034
>>> sh dev
VMS/VMB ADDR DEVTYPE NUMBYTES RM/FX WP
DEVNAM REV
------- ---- ------- -------- ----- --
------ ---
ESA0 08-00-2B-2D-FF-39
A/0/0
A/0/1
A/0/2
A/0/3
A/0/4
A/0/5
A/0/6
A/0/7
DKA100 A/1/0 DISK 1.05GB FX RZ26L 440C
DKA200 A/2/0 DISK 2.10GB FX RZ28 442C
..HostID.. A/6 INITR
>>> b dka200
-DKA200
?43 FILESTRUCT
>>> b dka100
-DKA100
?47 FILNOTCNTG
>>>
>>> help
BOOT [/[R5:]<bflg>] [<ddau>[:]]
CONTINUE
DEPOSIT [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U]
[/N:<n>]
[{ <addr> | <sym> | + | - | * | @ } [<datum>]]
EXAMINE [{ /B | /W | /L | /Q | /A }] [{ /P | /V | /I }] [/G] [/U]
[/N:<n>]
[{ <addr> | <sym> | + | - | * | @ }]
FIND [{ /MEMORY | /RPB }]
HALT
HELP
INITIALIZE
LOGIN
REPEAT <cmd>
SET BOOT <ddau>
SET BFLG <bflg>
SET DIAGENV <1-3>
SET FBOOT <0-1>
SET HALT <1-3>
SET KBD <0-15>
SET MOP <0-1>
SET PSE <0-1>
SET PSWD
SET SCSI <0-7>
SET TRIG <0-1>
SHOW { BOOT | BFLG | CONFIG | DEV | DIAGENV | FBOOT | ETHER | ERROR |
ESTAT | HALT | KBD | MEM | MOP | PSE | SCSI | TRIG }
START <addr>
TEST [/UTIL] <devnam | devnbr>
UNJAM
X <addr> <cnt> ...
?
On 3/27/20 5:13 PM, Dan B wrote:
> mine was dead a few times in the last 10 years, all i did is letting
> it plugged in and a week later came back up ...
--
Supratim Sanyal, W1XMT
39.19151 N, 77.23432 W
QCOCAL::SANYAL via HECnet
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20200330/5b2c2cd5/attachment.html>
More information about the Hecnet-list
mailing list