[HECnet] DECnet-VAX V3.0, VMS V3.5 (Was Re: Oldest VAX/VMS for VAX-11/730 on HECNET)

[Johnny Billquist]

Uh? The mac address AA-00-04-00-2A-7C means it has address 31.42. Just 
sayin...

   Johnny

On 2021-12-16 01:00, Supratim Sanyal wrote:
> OK, so I fired up a VAX/VMS 3.5 node and gave it the address 42 (just a 
> coincidence, not an answer to any question). I demoted it to an end-node 
> on a dedicated virtual ethernet adapter for the circuit with 
> DECnet/Python. No adjacency is established. A tshark indicates 
> DECnet-VAX V3.0 is appearing as 1.42 on the wire. Since there is no way 
> to ask DECnet-VAX V3.0 to pretend it is 31.42, I am not sure what the 
> next step, if any, might be to hook this up to my area on HECnet.
> 
> tshark dump is at 
> https://www.dropbox.com/s/40hvr4x6iq3esl8/tshark-31.12-31.42-DECnet-VAX-V3.0.tar.bz2?dl=0 
> . Maybe Paul has some advice?
> 
> Note: When DECnet-VAX V3.0 was configured as a L1 router, it oscillated 
> between "circuit up" and "line fault" every few seconds.
> 
> *$ mc ncp show exec char**
> *Node Volatile Characteristics as of 14-DEC-1984 23:46:34
> 
> Executor node = 42 (XXXV)
> 
> Identification           = DECnet-VAX V3.0,  VMS V3.5
> Management version       = V4.0.0
> Incoming timer           = 45
> Outgoing timer           = 45
> NSP version              = V3.2.0
> Maximum links            = 32
> Delay factor             = 80
> Delay weight             = 5
> Inactivity timer         = 60
> Retransmit factor        = 10
> Routing version          = V2.0.0
> Type                     = nonrouting IV
> Routing timer            = 600
> Broadcast routing timer  = 40
> Maximum address          = 1023
> Maximum circuits         = 16
> Maximum cost             = 1022
> Maximum hops             = 30
> Maximum visits           = 63
> Max broadcast nonrouters = 64
> Max broadcast routers    = 32
> Maximum buffers          = 100
> Buffer size              = 576
> Nonprivileged user id    = DECNET
> Default access           = incoming and outgoing
> Pipeline quota           = 1200
> 
> *$ mc ncp show circuit una-0 char**
> *Circuit Volatile Characteristics as of 14-DEC-1984 23:47:01
> 
> Circuit = UNA-0
> 
> State                    = on
> Service                  = disabled
> Cost                     = 3
> Router priority          = 64
> Hello timer              = 15
> Type                     = Ethernet
> 
> *$ mc ncp show line una-0 char**
> *Line Volatile Characteristics as of 14-DEC-1984 23:47:20
> 
> Line = UNA-0
> 
> Receive buffers          = 4
> Controller               = normal
> Protocol                 = Ethernet
> Service timer            = 4000
> Hardware address         = AA-00-04-00-2A-7C
> Buffer size              = 1498
> 
> Regards,
> Supratim
> 
> 
> On 12/9/21 7:40 PM, Paul Koning wrote:
>>> On Dec 9, 2021, at 6:02 PM, Johnny Billquist<bqt at softjar.se>  wrote:
>>>
>>> On 2021-12-09 23:52, Mark J. Blair wrote:
>>>> So, basically like bang paths in uucp? Maybe I will play with that sometime!
>>> Yes. But depending on application, it might be that all machines have to be up and running at the moment you're trying to use it, as opposed to UUCP which was store and forward.
>> Right.  Roughly speaking, the sending application sees that there are multiple nodes, and that it uses PMR for this.  It connects to the first of the nodes, object 63.  It then sends it the rest of the connect information. PMR picks off the next node.  If that's the last node, it connects to the requested object, otherwise again to another PMR.
>>
>> VMS has PMR-like capability for network file access because RMS recognizes file names with node name prefixes, so it's an automatic consequence of that feature.  RSTS NFT (the application which does network file access) doesn't support PMR as far as I remember.  So if you have VMS nodes around you can chain node names in file access, with RSTS-only you cannot.
>>
>> MAIL does it internally I think.  Some vague memory says that RSTS network terminal ("set host") has PMR support, I need to look.
>>
>> I'll definitely add PMR to PyDECnet at some point fairly soon.
>>
>> 	paul
>>
> -- 

-- 
Johnny Billquist                  || "I'm on a bus
                                   ||  on a psychedelic trip
email: bqt at softjar.se             ||  Reading murder books
pdp is alive!                     ||  tryin' to stay hip" - B. Idol