[HECnet] ANF10 network --> Kdp/Dup --> recipe for 8 Dups

Peter Lothberg roll at stupi.com
Wed Nov 17 08:41:56 PST 2021


Reindert, 

Thanks.. 

Instructions are fine, I was on my way to chase down the places the number of DUP's 
where "hard coded". If you talkedto Johnny, you must knew that I did only did 
stuff for the KI10 cpu, no 2020. 

DN200, would be cool, I can provide a place you can scp a tar file to, I'll be more than happy 
to have a look.. 

I take it you want to be part of the HECanf if we get it working? -:) 

--P 

> From: "R. Voorhorst" <R.Voorhorst at swabhawat.com>
> To: "hecnet" <hecnet at Update.UU.SE>
> Cc: "bob" <bob at jfcl.com>, "Peter Lothberg" <roll at stupi.com>
> Sent: Wednesday, November 17, 2021 4:07:15 AM
> Subject: RE: [HECnet] ANF10 network --> Kdp/Dup --> recipe for 8 Dups

> The following recipe enables 8 dups:

> In simh in Pdp10_defs.h: #define DUP_LINES 8 /* max # of DUP11's */

> and rebuild the pdp10.

> In Tops10: Edit NETPRM.MAC in the monitor build tree, usually in [10,7,MON], and
> modify: MXNDUP==^D8

> from ^D2 and reassemble NETPRM and D8KINT and replace it in TOPS10.REL.

> In SYSCNF.MAC locate M.KDUP and modify as follows

> M.KDUP==:10

> ;; Type of line for KDP0 (ANF10,DECNET,USER,IBM) [

> ;; This question is asked for each KDP (KMC/DUP line) indicated in the

> ;; previous question. Type the name of the network product that the line

> ;; will support.]: d

> M.0KDP==:2

> M.1KDP==:2

> M.2KDP==:2

> M.3KDP==:2

> M.4KDP==:1

> M.5KDP==:1

> M.6KDP==:1

> M.7KDP==:1

> The above values are for 4 Decnet and 4 Anf10 but that can be filled in
> differently as needed

> Then rebuild the monitor.

> Change the Simh Pdp10 config file with the required settings set dup lines=8 and
> attach definitions for Dup0 to Dup7.

> That is all there is to it; if the instructions are to sparse I will expand
> them; patched files are overkill here as generally my files have evolved
> further in version numbers and features and undoing the unnecessary ones may
> lead to errors.

> The DN200 files have to wait till next week as I have other obligations at the
> moment.

> Success,

> Reindert
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20211117/b60e5601/attachment-0001.htm>


More information about the Hecnet-list mailing list