[HECnet] Can't remember how I'm connected to HECnet

[Steve Davidson]

-----Original Message-----
From: owner-hecnet at Update.UU.SE on behalf of Marc Chametzky
Sent: Thu 3/3/2011 15:19
To: hecnet at Update.UU.SE
Subject: [HECnet] Can't remember how I'm connected to HECnet

This is embarrassing.

I've got a DECnet-over-IP connection set up on my SIMH VAX. It had been 
working, but then I switched firewalls some time back and messed up the 
configuration so that packets from my VAX were coming from the wrong IP 
address. I only recently discovered that this was the problem and have 
now fixed it.

My TCP-0-0 circuit remains in the "-starting" state, so either I've 
still got something wrong or maybe the other end of the circuit is 
disabled since I was misconfigured for so long. Another possibility is 
that the other end's IP address changed and I haven't updated my side.

My problem is that I don't recall who set up the connection for me to be 
on HECnet.

So, if you've got a DECnet-over-IP connection configured to DUSTY, would 
you please help me get reconnected... Pretty please? :-)

--Marc





I forgot to ask... Where are you located?   If you are in the Eastern US (or Eastern Canada) then you can connect to my systems.

-Steve