[HECnet] Access to SLAVE via LAT from local DECserver - permission denied...

[Steve Davidson]

Mark,

Look at the file MIM::DU4:[DECNET]LATGROUPS.TXT, then configure your
DECserver to use the LAT groups assigned to your network.

-Steve

-----Original Message-----
From: owner-hecnet at Update.UU.SE 
[mailto:owner-hecnet at Update.UU.SE] On Behalf Of Mark Wickens
Sent: Tuesday, January 24, 2012 18:09
To: hecnet at Update.UU.SE
Subject: [HECnet] Access to SLAVE via LAT from local 
DECserver - permission denied...

Hi guys,

My node SLAVE is configured for LAT as follows:


Node Name:     SLAVE                                                   LAT Protocol 
Version:           5.3
Node State:   On
Node Ident:   AlphaServer 1000A 5/300 VMS Alpha V8.3       MSW, 
Windermere, UK

Incoming Connections:   Enabled                           Incoming Session 
Limit:     None
Outgoing Connections:   Enabled                           Outgoing Session 
Limit:     None
Service Responder:         Disabled                         Announcements:       
        Enabled

Circuit Timer (msec):               80                         Keepalive Timer 
(sec):           20
Retransmit Limit (msg):             8                         Node Limit 
(nodes):             None
Multicast Timer (sec):             60                         CPU Rating:             
                    0
Maximum Unit Number:             9999                         Extra Datalink 
Buffers:           9
Queue Limit:                                 24                         Forward Session 
Limit:           16

User Groups:         20, 23
Service Groups:   20, 23
Service Classes: 1

Service Name         Status           Rating   Identification
SLAVE                       Available         81 D   AlphaServer 1000A 5/300 
VMS Alpha 
V8.3       M
SW, Windermere, UK


I have a DECserver 90M connected locally, but I get a 
connection refused when I attempt a CONNECT SLAVE.

Is this a permissions issue I need to sort via configuration 
on SLAVE, or is this something to do with the DECserver configuration.

Thanks, Mark.