[HECnet] TOPS-20 DECnet

[Johnny Billquist]

On 2012-01-12 00:03, Rok Vidmar wrote:
TOPS-20 Network Configurator for DN20, Version 4A(11)

      That seems to be ANF-10 (Advanced Network Functions)
  protocol configuration utility.
      ANF-10 has nothing to do with DECnet, but later on
  you could upload DN20 with DECnet IV image to have
  DECnet connectivity over synchronous lines.
      I had very little experience with TOPS-20 and from
  what I see it was quite different on TOPS-10. But I
  would certainly look for DECnet-20 and I would not
  expect more than phase III.

DECnet-20 is phase IV. Don't anyone read when I paste in stuff from NCP here?

Here is some more explicit output then:

.ncp tell sol sho exec cha

Node characteristics as of 12-JAN-12 00:16:09

Executor node = 59.10 (SOL)

    Identification = Systems Concepts SF CA USA - SC30M - DN-20 4.0, Management version = 4.0.0
    Loop count = 1, Loop length = 127
    Loop with = Mixed, Incoming timer = 30
    Outgoing timer = 60, NSP version = 4.0.0
    Maximum links = 65535, Delay factor = 48
    Delay weight = 10
    Inactivity timer = 120, Retransmit factor = 10
    Routing version = 2.0.0, Type = Routing IV
    Routing timer = 600
    Broadcast routing timer = 40, Maximum address = 1023
    Maximum circuits = 20
    Maximum cost = 100
    Maximum hops = 16, Maximum visits = 20
    Maximum broadcast endnodes = 64
    Maximum broadcast routers = 32
    Maximum buffers = 80, Buffer size = 576
    Segment buffer size = 576

.

	Johnny

-- 
Johnny Billquist                                   || "I'm on a bus
                                                                  ||   on a psychedelic trip
email: bqt at softjar.se                         ||   Reading murder books
pdp is alive!                                         ||   tryin' to stay hip" - B. Idol