[HECnet] two dumb RSX questions

[Jerome H. Fine]

>John Wilson wrote:

The order of dependence on strictly working (and/or accurately emulated)
hardware goes:   RT => RSX => RSTS.   So the fact that something works
with RT proves *nothing*!   (I've learned this the hard way so many times.)

Of course, looked at another way, it's nice of RT to be willing to run
on hardware that's not long for this world...

... OR the CSR for the hardware and the device driver do not
match.   Fortunately, RT-11 allows the user to change the
CSR after the boot (for a data device obviously).   After that,
the user can INSTALL and LOAD.

RT-11 also supports UNLOAD and REMOVE if a user
needs to power down a data hard drive and physically replace
that drive with a different hard drive.   This is really especially
helpful with MSCP devices.   If the user has ONLY the single
controller to boot RT-11, VM: can be used to hold the few
essential files required by the operating system.   At that point,
the hard drive on an MSCP device can have the power
and cable removed (after the RT-11 UNLOAD and REMOVE)
and a different hard drive substituted (followed by the RT-11
INSTALL and LOAD commands).   Try doing that on RSX-11
or RSTS/E.

Jerome Fine