[HECnet] Cisco HECnet odd issues

[Cory Smelosky]

Hello all,

I'm not sure what I've done...but since the move to a real 7200...DECnet has stopped working. ;)

marianne#ping 1.13

Type escape sequence to abort.
Sending 5, 100-byte DECnet echos to atg 0 area.node 1.13, timeout is 5 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 220/261/292 ms

GEWT::B4$ set host mim
%SYSTEM-F-UNREACHABLE, remote node is not currently reachable
(takes awhile to time out)

The 7200 IS configured to be an area router, and I changed the MAC address to match 9.1023.

marianne#sh int fastethernet1/0
FastEthernet1/0 is up, line protocol is up
  Hardware is i82543 (Livengood), address is aa00.0400.ff27 (bia 00d0.6353.881c)

NCP>sh node 9.1023


Node Volatile Summary as of 10-JUN-2013 01:29:42

      Node                     State           Active   Delay     Circuit         Next node
                                                          Links

9.1023                   reachable                                       QNA-0                 9.1023

marianne.gimme-sympathy.org (10.10.0.5) at aa:00:04:00:ff:27 [ether] on eth0

Any ideas?   Everything looks to be in order...

--
Cory Smelosky
http://gewt.net/ Personal stuff
http://gimme-sympathy.org Experiments