[HECnet] Same MAC address on different nodes

[Hans Vlems]

My apologies, it's been too long to remember rsx. A netgen is too much work for an experiment.
Background for the request: I had problems running    two area routers on the same lan, though just one was simh based. Both were VMS though.


Verzonden vanaf mijn BlackBerry 10-smartphone.
   Origineel bericht   
Van: Jean-Yves Bernier
Verzonden: zondag 25 mei 2014 18:14
Aan: hecnet at Update.UU.SE
Beantwoorden: hecnet at Update.UU.SE
Onderwerp: Re: [HECnet] Same MAC address on different nodes

At 5:52 PM +0200 25/5/14, Hans Vlems wrote:

Mc ncp Def exec type endnode

NCP>SET EXEC TYPE ENDNODE
SET EXEC TYPE ENDNODE>>
NCP -- Set not accepted, invalid parameter value, Type
NCP>HELP SET EXEC
Use the SET EXECUTOR command to create or modify executor node parameters.
The format is:

SET EXECUTOR parameters

Parameter types are ALL or one or more of:

DTE	HOST	STATE
NODE	INCOMING TIMER	OUTGOING TIMER
INACTIVITY TIMER	RETRANSMIT FACTOR ROUTING TIMER
SEGMENT BUFFER SIZE	RECEIVE PASSWORD TRANSMIT PASSWORD
VERIFICATION [STATE]	CONFIDENCE TIMER MAXIMUM PATH SPLITS
INCOMING PROXY	OUTGOING PROXY


Trying CFE.


CFE
Enter filename: LB:[5,54]CETAB.MAC
CFE>HELP DEF EXEC
Use the DEFINE EXECUTOR command to establish executor node parameters.
The format is:

DEFINE EXECUTOR parameters

Parameter types are:

ADDRESS	BROADCAST ROUTING TIMER HOST
IDENTIFICATION	MAXIMUM ADDRESS	MAXIMUM BROADCAST ENDNODES
MAXIMUM COST	MAXIMUM HOPS	MAXIMUM LINKS
MAXIMUM NODE COUNTERS NAME	ROUTING TIMER
SEGMENT BUFFER SIZE	VERIFICATION STATE CONFIDENCE TIMER
INCOMING PROXY	OUTGOING PROXY	MAXIMUM PATH SPLITS


No way to SET/DEF EXEC ENDNODE.


Both nodes have licenses for DECnet installed?

Did not know DECnet used DRM.


-- 
Jean-Yves Bernier