[HECnet] "Dropped by adjacent node" ....

[Peter Lothberg]

Bob and I are experimenting with Multinet in TCP mode, seems fine, but
I would like to se some traffic on the link, and it's assymetric.

NCP>tell legato sh node mim
Node Volatile Summary as of 30-MAY-2014 02:13:14

      Node                     State           Active   Delay     Circuit         Next node
                                                          Links
1.13 (MIM)                                                                     TCP-5-9           59.58	(STUPI)


NCP>tell mim sh node legato
Node Volatile Summary as of 30-MAY-2014 02:13:36

      Node                     State           Active   Delay     Circuit         Next node
                                                          Links

2.1 (LEGATO)                                       0             6                                 19.41 (SG1)


NCP>tell sg1 sh cir   TCP-0-2     char
Circuit Volatile Characteristics as of 30-MAY-2014 02:18:56

Circuit = TCP-0-2

State                                       = on
Service                                   = enabled
Cost                                         = 1
Hello timer                           = 300
Verification                         = disabled
Adjacent node                       =   2.1 (LEGATO)
Listen timer                         = 600


Would it be possible to change the metric on SG1 on TCP-0-2 to for
example 10?

Actually, what hapen if we set all multinet UDP links to 20 
and TCP links to 10 ? Things would then be symetric and take the most
reliable path.... or?

--P