[HECnet] ULTRIX on VAX

[Cory Smelosky]

On Tue, 16 Sep 2014, Johnny Billquist wrote:

BA123.
5 4 3 2 1
N D R R P
5 4 3 2 1
E D R R P
N = NIC, D = DHV11, R = RAM, P = Processor, E = Emprt.   All slots after
are empty

Hum. Hard to say for sure, but this might be a classical case of you having the NIC in the wrong place. Move it over to the "E" side...


That resulted in:

-XQA0
?4B CTRLERR, XQA0
?06 HLT INST
              PC = 00000C1A
Failure.

Kept NIC in previously-E slot and put a TQK50 in the former-NIC slot.

Loading operating system image ...
************************************
ULTRIX V4.0 (Rev. 158) System #2: Sat Mar 31 03:23:27 EST 1990
real mem   = 16723968
avail mem = 11991040
Buffer configuration adjusted to run with small system page table
using 239 buffers containing 1672192 bytes of memory
KA650 processor with an FPU
              CPU microcode rev = 4, processor firmware rev = 83
Q22 bus
klesiu0 at uba0
uq16 at klesiu0 csr 174500 vec 774, ipl 17
qe0 at uba0 csr 174440 vec 770, ipl 17
qe0: DEC DELQA Ethernet Interface DEQNA-lock Mode, hardware address 08:00:2b:18:ba:b4
root on bonerhitler:/dlclient0/lolwat.root
swap on bonerhitler:/dlclient0/lolwat.root/dev/swap
swap size - 131072 blocks
WARNING: todr too small -- CHECK AND RESET THE DATE!
Sat Sep 15 18:56:18 EDT 1990
Automatic reboot in progress...
Time set to Sat Sep 15 20:57:40 1990

/etc/nfsstat does not show increasing values.

Using OpenBSD 4.4's boot.mop with no bootparams gives me:
stray interrupt: vector 0x18, ipl 31
stray interrupt: vector 0x18, ipl 31
stray interrupt: vector 0x18, ipl 31
stray interrupt: vector 0x18, ipl 31
spammed but that could simply be a bootblock bug.

	Johnny



-- 
Cory Smelosky
http://gewt.net Personal stuff
http://gimme-sympathy.org Projects