[HECnet] RP07s to a good home...
Dave McGuire
mcguire at neurotica.com
Mon May 4 13:48:11 PDT 2015
If that Pro380 is actually a "VAXconsole" system, and if its new home
won't see it used as such, I would very much like to get ahold of the
VAXconsole board, cabling assembly, and software (if any).
-Dave
On 05/04/2015 04:05 PM, Pontus wrote:
> On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
>> I've been working out a deal with Ragge and several others for a
>> few weeks now after announcing on CC-tech.
>>
>> I and Ragge strongly prefer that you go through me.
>>
>> The RP07 are still unclaimed and so is a lot more. Let me know
>> if you are seriously interested and I'll fill you in and include
>> you in future talks.
>>
>> /P
>>
>
>
> Hi
>
> I realize now that I might have worded the above a bit strong. You are
> welcome to spread this as much as you want. But it will probably benefit
> all if I'm in the loop.
>
> Anyway, now that I have a proper keyboard (not just my phones onscreen
> one) I can give you some more details. It's the computer club in Luleå
> that is cleaning out old "junk". Here are some pictures:
>
> http://brain.brokenbrain.se/skrot_dh1/
>
> Take a break and look at them now.
>
> Now that you are back, here is what is shown, more or less.
>
> Spoken for:
>
> * DECsystem 5500
> * Nord-10 crates
> * ND-100 cards
> * HAWK-disks
> * Terminalen for Nord-10
> * 10-20 1/2" band
> * A bunch of cabling, docs and 5 1/4" floppies with software for Nord
> computers.
> * DEC 8400
> * DEC PRO380
> * RA72
> * Unibus och BiBus-kort and some XMI.
> * RX01 -floppies
> * 4000/500
> * 4000/90 (memory removed)
> * infoserver 100
> * 2 * R215F
> * RX01/02-floppies
> * 11/750 without PSU
>
> Probably spoken for (we are working out the shipping details):
>
> * DEC 8400
> * MicroVAX 8354
> * TU81 /w RA82
>
> Not spoken for:
>
> * 4000/60
> * 1/2" tapes (lot of them)
> * Two RA90's
> * MV3900 /w RA82 and RL02 on top.
> * VAXstation 3100
> * VAXserver 3100
> * Two Vaxstation 3100/76
> * HSC90
> * Two RP07, one spare part.
> * MikroVAX 3800
> * MicroVAX only marked 640QR?
> * Lots of CI and SDI cabling.
> * 4000/300 (looked empty unfortunately)
>
> Before you ask the brief case with test equipment on picture
> 20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
> it.
>
> Regarding shipping, there are two cars going from Luleå to Uppsala that
> can bring a moderate amount of gear.
>
> I'll answer any questions you might have as best I can.
>
> Regards,
> Pontus.
--
Dave McGuire, AK4HZ
New Kensington, PA
More information about the Hecnet-list
mailing list