[HECnet] RP07s to a good home...

[Pontus Pihlgren]

It is and the machine will end up with me. And since it is 
unlikely that I'll ever have an 8800(I think thats the model) I 
wouldn't mind parting with the "extra" bits.

Do you have a machine to use it with?

/P

On Mon, May 04, 2015 at 04:48:11PM -0400, Dave McGuire wrote:
> 
>   If that Pro380 is actually a "VAXconsole" system, and if its new home
> won't see it used as such, I would very much like to get ahold of the
> VAXconsole board, cabling assembly, and software (if any).
> 
>                -Dave
> 
> On 05/04/2015 04:05 PM, Pontus wrote:
> > On 05/04/2015 07:54 PM, Pontus Pihlgren wrote:
> >> I've been working out a deal with Ragge and several others for a
> >> few weeks now after announcing on CC-tech.
> >>
> >> I and Ragge strongly prefer that you go through me.
> >>
> >> The RP07 are still unclaimed and so is a lot more. Let me know
> >> if you are seriously interested and I'll fill you in and include
> >> you in future talks.
> >>
> >> /P
> >>
> > 
> > 
> > Hi
> > 
> > I realize now that I might have worded the above a bit strong. You are
> > welcome to spread this as much as you want. But it will probably benefit
> > all if I'm in the loop.
> > 
> > Anyway, now that I have a proper keyboard (not just my phones onscreen
> > one) I can give you some more details. It's the computer club in Luleå
> > that is cleaning out old "junk". Here are some pictures:
> > 
> > http://brain.brokenbrain.se/skrot_dh1/
> > 
> > Take a break and look at them now.
> > 
> > Now that you are back, here is what is shown, more or less.
> > 
> > Spoken for:
> > 
> >  * DECsystem 5500
> >  * Nord-10 crates
> >  * ND-100 cards
> >  * HAWK-disks
> >  * Terminalen for Nord-10
> >  * 10-20 1/2" band
> >  * A bunch of cabling, docs and 5 1/4" floppies with software for Nord
> > computers.
> >  * DEC 8400
> >  * DEC PRO380
> >  * RA72
> >  * Unibus och BiBus-kort and some XMI.
> >  * RX01 -floppies
> >  * 4000/500
> >  * 4000/90 (memory removed)
> >  * infoserver 100
> >  * 2 * R215F
> >  * RX01/02-floppies
> >  * 11/750 without PSU
> > 
> > Probably spoken for (we are working out the shipping details):
> > 
> >  * DEC 8400
> >  * MicroVAX 8354
> >  * TU81 /w RA82
> > 
> > Not spoken for:
> > 
> >  * 4000/60
> >  * 1/2" tapes (lot of them)
> >  * Two RA90's
> >  * MV3900 /w RA82 and RL02 on top.
> >  * VAXstation 3100
> >  * VAXserver 3100
> >  * Two Vaxstation 3100/76
> >  * HSC90
> >  * Two RP07, one spare part.
> >  * MikroVAX 3800
> >  * MicroVAX only marked 640QR?
> >  * Lots of CI and SDI cabling.
> >  * 4000/300 (looked empty unfortunately)
> > 
> > Before you ask the brief case with test equipment on picture
> > 20150407_100342.jpg is an alignment tool for an RP06 and Ragge will keep
> > it.
> > 
> > Regarding shipping, there are two cars going from Luleå to Uppsala that
> > can bring a moderate amount of gear.
> > 
> > I'll answer any questions you might have as best I can.
> > 
> > Regards,
> > Pontus.
> 
> 
> -- 
> Dave McGuire, AK4HZ
> New Kensington, PA