[HECnet] dec repeater 90ts

[Rob Jarratt]

And I should point out that my notes came originally from Mark Wickens.

Regards

Rob

> -----Original Message-----
> From: owner-hecnet at Update.UU.SE [mailto:owner-
> hecnet at Update.UU.SE] On Behalf Of Rob Jarratt
> Sent: 04 December 2016 10:13
> To: hecnet at Update.UU.SE
> Subject: RE: [HECnet] dec repeater 90ts
> 
> It seems that the PSUs often fail, test it with a multimeter. If it is the
PSU,
> here are my notes on how to make your own mini-DIN PSU connector for a
> 90M:
> 
> Pin        Output
> -------------------
> 1        +5V
> 2        GND
> 3        +5V
> 4        GND
> 5        +5V
> 6        N/C
> 7        GND
> Shield    Tied to chassis ground
> 
> 
> 
>          5    6    7
>          o    o    o
> 
>    3  o      [x]     o 4
> 
>           o      o
>           1      2
> 
> Connector physical pinout looking into the connector on end of cable.
> 
> Regards
> 
> Rob
> 
> > -----Original Message-----
> > From: owner-hecnet at Update.UU.SE [mailto:owner-
> hecnet at Update.UU.SE] On
> > Behalf Of john connor
> > Sent: 04 December 2016 05:34
> > To: hecnet at Update.UU.SE
> > Subject: [HECnet] dec repeater 90ts
> >
> > Hi,
> >
> >  does anybody have schema for dec repeater 90ts and psu h7082-ab for
> > standalone work for this repeater
> >
> >  seems mine repeater died or psu died, need to check
> >
> >  also how this jack 7pin on psu called and what is signal scheme for
> > this
> jack
> >
> > thanks in advance,
> > Serg aka VaxCavalera
> >
> > > 26 нояб. 2016 г., в 23:36, Sampsa Laine <sampsa at mac.com> написал(а):
> > >
> > >
> > >> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-
> > <system at TMESIS.COM> wrote:
> > >>
> > >> G. <gerry77 at mail.com> writes:
> > >>
> > >>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote:
> > >>>>
> > >>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote
> > >>>> host and=
> > >>> username of=20
> > >>>> someone logged into my system over DECNET? I=E2=80=99m writing
> a
> > >>>> script=
> > >>> that needs=20
> > >>>> the host + username of the person connecting to a captive account..
> > >>>
> > >>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D
> > >>> F$ELEMENT(0,":",REMPORT) REMUSER =3D
> F$ELEMENT(2,":",REMPORT)
> > >>
> > >> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID?
> > >>
> > >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'"
> > >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'"
> > >
> > >
> > > That does look a lot simpler! Thanks.
> > >
> > > Sampsa
> > >
> > >