[HECnet] dec repeater 90ts
Rob Jarratt
robert.jarratt at ntlworld.com
Sun Dec 4 02:13:29 PST 2016
It seems that the PSUs often fail, test it with a multimeter. If it is the
PSU, here are my notes on how to make your own mini-DIN PSU connector for a
90M:
Pin Output
-------------------
1 +5V
2 GND
3 +5V
4 GND
5 +5V
6 N/C
7 GND
Shield Tied to chassis ground
5 6 7
o o o
3 o [x] o 4
o o
1 2
Connector physical pinout looking into the connector on end of cable.
Regards
Rob
> -----Original Message-----
> From: owner-hecnet at Update.UU.SE [mailto:owner-
> hecnet at Update.UU.SE] On Behalf Of john connor
> Sent: 04 December 2016 05:34
> To: hecnet at Update.UU.SE
> Subject: [HECnet] dec repeater 90ts
>
> Hi,
>
> does anybody have schema for dec repeater 90ts and psu h7082-ab for
> standalone work for this repeater
>
> seems mine repeater died or psu died, need to check
>
> also how this jack 7pin on psu called and what is signal scheme for this
jack
>
> thanks in advance,
> Serg aka VaxCavalera
>
> > 26 нояб. 2016 г., в 23:36, Sampsa Laine <sampsa at mac.com> написал(а):
> >
> >
> >> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-
> <system at TMESIS.COM> wrote:
> >>
> >> G. <gerry77 at mail.com> writes:
> >>
> >>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote:
> >>>>
> >>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote host
> >>>> and=
> >>> username of=20
> >>>> someone logged into my system over DECNET? I=E2=80=99m writing a
> >>>> script=
> >>> that needs=20
> >>>> the host + username of the person connecting to a captive account..
> >>>
> >>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D
> >>> F$ELEMENT(0,":",REMPORT) REMUSER =3D F$ELEMENT(2,":",REMPORT)
> >>
> >> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID?
> >>
> >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'"
> >> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'"
> >
> >
> > That does look a lot simpler! Thanks.
> >
> > Sampsa
> >
> >
More information about the Hecnet-list
mailing list