[HECnet] dec repeater 90ts

[Mark Wickens]

It means no connect

On 4 Dec 2016 14:35, "Cory Smelosky" <b4 at gewt.net> wrote:

> Most likely "not connected"
>
> Sent from my iPhone
>
> > On Dec 4, 2016, at 06:31, john connor <dophini at dir.bg> wrote:
> >
> > Thanks guys
> >
> > just question 6 pin is N/C what that mean? GND is ground but what is N/C
> >
> > and guys does anybody have bn24h rj45-mmj crossover cable to manage this
> equipment with console? i will buy it.
> >
> > thanks,
> > VaxCavalera
> >
> >> 4 дек. 2016 г., в 13:46, Rob Jarratt <robert.jarratt at ntlworld.com>
> написал(а):
> >>
> >> And I should point out that my notes came originally from Mark Wickens.
> >>
> >> Regards
> >>
> >> Rob
> >>
> >>> -----Original Message-----
> >>> From: owner-hecnet at Update.UU.SE [mailto:owner-
> >>> hecnet at Update.UU.SE] On Behalf Of Rob Jarratt
> >>> Sent: 04 December 2016 10:13
> >>> To: hecnet at Update.UU.SE
> >>> Subject: RE: [HECnet] dec repeater 90ts
> >>>
> >>> It seems that the PSUs often fail, test it with a multimeter. If it is
> the
> >> PSU,
> >>> here are my notes on how to make your own mini-DIN PSU connector for a
> >>> 90M:
> >>>
> >>> Pin        Output
> >>> -------------------
> >>> 1        +5V
> >>> 2        GND
> >>> 3        +5V
> >>> 4        GND
> >>> 5        +5V
> >>> 6        N/C
> >>> 7        GND
> >>> Shield    Tied to chassis ground
> >>>
> >>>
> >>>
> >>>        5    6    7
> >>>        o    o    o
> >>>
> >>>  3  o      [x]     o 4
> >>>
> >>>         o      o
> >>>         1      2
> >>>
> >>> Connector physical pinout looking into the connector on end of cable.
> >>>
> >>> Regards
> >>>
> >>> Rob
> >>>
> >>>> -----Original Message-----
> >>>> From: owner-hecnet at Update.UU.SE [mailto:owner-
> >>> hecnet at Update.UU.SE] On
> >>>> Behalf Of john connor
> >>>> Sent: 04 December 2016 05:34
> >>>> To: hecnet at Update.UU.SE
> >>>> Subject: [HECnet] dec repeater 90ts
> >>>>
> >>>> Hi,
> >>>>
> >>>> does anybody have schema for dec repeater 90ts and psu h7082-ab for
> >>>> standalone work for this repeater
> >>>>
> >>>> seems mine repeater died or psu died, need to check
> >>>>
> >>>> also how this jack 7pin on psu called and what is signal scheme for
> >>>> this
> >>> jack
> >>>>
> >>>> thanks in advance,
> >>>> Serg aka VaxCavalera
> >>>>
> >>>>> 26 нояб. 2016 г., в 23:36, Sampsa Laine <sampsa at mac.com> написал(а):
> >>>>>
> >>>>>
> >>>>>> On 26 Nov 2016, at 22:32, Brian Schenkenberger, VAXman-
> >>>> <system at TMESIS.COM> wrote:
> >>>>>>
> >>>>>> G. <gerry77 at mail.com> writes:
> >>>>>>
> >>>>>>>> On Sat, 26 Nov 2016 21:26:31 +0200, Sampsa Laine wrote:
> >>>>>>>>
> >>>>>>>> Guys, what=E2=80=99s the DCL lexical for extracting the remote
> >>>>>>>> host and=
> >>>>>>> username of=20
> >>>>>>>> someone logged into my system over DECNET? I=E2=80=99m writing
> >>> a
> >>>>>>>> script=
> >>>>>>> that needs=20
> >>>>>>>> the host + username of the person connecting to a captive
> account..
> >>>>>>>
> >>>>>>> REMPORT =3D F$GETDVI("TT:","TT_ACCPORNAM") REMNODE =3D
> >>>>>>> F$ELEMENT(0,":",REMPORT) REMUSER =3D
> >>> F$ELEMENT(2,":",REMPORT)
> >>>>>>
> >>>>>> Why not just translate the logicals: SYS$REM_NODE and SYS$REM_ID?
> >>>>>>
> >>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_NODE")'"
> >>>>>> $ WRITE SYS$OUTPUT "''F$trnlnm("SYS$REM_ID")'"
> >>>>>
> >>>>>
> >>>>> That does look a lot simpler! Thanks.
> >>>>>
> >>>>> Sampsa
> >>>>>
> >>>>>
> >>
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20161204/4c7284a9/attachment.html>