[HECnet] Announcing TCP/IP for RSX-11M-PLUS
John Forecast
john at forecast.name
Fri Jan 1 12:50:01 PST 2016
I just tried adding “.ifact telnet abo telnet” to IPREM and there was no delay during shutdown.
John.
> On Jan 1, 2016, at 2:47 PM, Johnny Billquist <bqt at softjar.se> wrote:
>
> Hi.
> The turning off of TCP/IP is a big kludgy, and do not properly handle if there are active connections.
>
> I would, in general, recommend that you just leave TCP/IP alone, and it will stop when the system halts.
>
> One day I'll get around to "fix" that part, but it's a low priority thing.
>
> If you want it to shut down cleanly, you need to check with NETSTAT/ALL, and the list needs to be totally empty before you run IPREM.
>
> Johnny
>
> On 2016-01-01 19:28, John Forecast wrote:
>> Johnny,
>> Thanks for fixing the TELNETD configuration issue, it’s working
>> fine now. I have one additional problem during shutdown when IPREM is
>> called from lb:[1,2]shutup.cmd I get the following error:
>>
>> >ifc stop
>>
>> Stopping IP.
>>
>> Stopping UD.
>>
>> TC not running..
>>
>> >abo ethacp
>>
>> TCP/IP - ethernet ACP exiting...
>>
>>
>> and the subsequent “con off tc:” hangs up for several minutes before
>> timing out:
>>
>> >con off tc:
>>
>> CON -- Command execution error.
>> Timeout on unit quieting operation
>> OFFLINETC0:
>> >unl if:/vec
>>
>> I’m running M+ 4.6 on an emulated 11/93 with DECnet enabled. Up until
>> the shutdown everything appeared to be running - I was able to
>> successfully telnet into the system. Let me know if you need any more
>> information.
>>
>> John.
>>
>>> On Dec 29, 2015, at 9:12 PM, Johnny Billquist <bqt at softjar.se
>>> <mailto:bqt at softjar.se>> wrote:
>>>
>>> John, I've rewritten that part now. It no longer asks for the number
>>> of terminals at IPGEN. Instead you have a new logical name,
>>> TELNET$TERMINALS, for which you have a prototype in the IPAPPL.NEW
>>> file, that you can copy. This logical name now controls how many
>>> terminals are created.
>>>
>>> Could you (or someone else) test and report if I got anything wrong in
>>> the installation procedure?
>>>
>>> Johnny
>>>
>>> On 2015-12-24 03:01, John Forecast wrote:
>>>> Johnny,
>>>> I installed this version of your code and had a problem with
>>>> TELNETD. Because I had changed the number of supported terminals (from
>>>> 10 to 4) I got
>>>>
>>>> INS -- Length mismatch common block TELCOM
>>>>
>>>> while trying to install TELNETD. Looks like you’ll need to rebuild it as
>>>> part of the install.
>>>>
>>>> John.
>>>>
>>>> On Dec 18, 2015, at 11:52 PM, Johnny Billquist <bqt at softjar.se
>>>> <mailto:bqt at softjar.se>
>>>> <mailto:bqt at softjar.se>> wrote:
>>>>>
>>>>> Well, about two months since my last announcement, and some
>>>>> improvements have been done, so I figured I should do another one.
>>>>>
>>>>> I've cut a new release of TCP/IP for RSX, and I encourage everyone to
>>>>> update to this latest release.
>>>>>
>>>>> A short list of changes since my last release:
>>>>>
>>>>> TCP:
>>>>> . Performance improvements. TCP timers have been redesigned for better
>>>>> performance. This gave FTP a performance increase of about 15$.
>>>>> . TCP negative ACK detection has been improved.
>>>>> , TCP receive packet handling have been redesigned for better
>>>>> performance, and better code structure.
>>>>> . Added guards against data received after FIN.
>>>>> . Bugfix in SPOOF hostname printouts when filter was cleared.
>>>>> . Bugfix in tcp timers that could cause a close to take a very
>>>>> long time to clean up.
>>>>>
>>>>> FTP:
>>>>> . Bugfix in user verification code which could cause program
>>>>> to crash. This affected ftpd.
>>>>> . Changed ftp and ftpd to create files without max record length when
>>>>> dealing with binary files.
>>>>>
>>>>> TELNET:
>>>>> . Added exit handler to telnetd, so that telnetd cannot be aborted
>>>>> while active sessions exist.
>>>>>
>>>>> HTTPD:
>>>>> . Improved webserver handling of binary files.
>>>>>
>>>>> As usual, the distribution is available from:
>>>>> ftp://mim.update.uu.se/bqtcp.dsk
>>>>> ftp://mim.update.uu.se/bqtcp.tap
>>>>> ftp://ftp.update.uu.se/pub/pdp11/rsx/tcpip/tcpip.dsk
>>>>>
>>>>> The documentation is also available through ftp on Mim, or also at
>>>>> http://mim.update.uu.se/tcpipdoc
>>>>>
>>>>> Note! I've realized that BQTCP/IP do not work right if you have a
>>>>> PDP-11/74 with multiple processors online. I'll fix that at some point,
>>>>> as it's probably just a case of affinity not being set on devices, nor
>>>>> relevant processes. This might only be a problem with telnet in fact.
>>>>> I know for sure that the IP and TCP drivers works ok in multiprocessor
>>>>> systems.
>>>>>
>>>>> Johnny
>>>>>
>>>>> --
>>>>> Johnny Billquist || "I'm on a bus
>>>>> || on a psychedelic trip
>>>>> email: bqt at softjar.se || Reading murder books
>>>>> pdp is alive! || tryin' to stay hip" - B. Idol
>>>>
>>>
>>>
>>> --
>>> Johnny Billquist || "I'm on a bus
>>> || on a psychedelic trip
>>> email: bqt at softjar.se <mailto:bqt at softjar.se> || Reading
>>> murder books
>>> pdp is alive! || tryin' to stay hip" - B. Idol
>>
>
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
More information about the Hecnet-list
mailing list