[HECnet] My RSTS/E system...
Steve Davidson
steve at davidson.net
Sun Aug 12 18:54:16 PDT 2018
PLUTO:: is running V10.1L.
I think you have an account. I will verify and get back to you.
-Steve
Sent from my iPhone
> On Aug 12, 2018, at 20:11, Johnny Billquist <bqt at softjar.se> wrote:
>
> By the way, Steve. What version of RSTS/E?
>
> I noticed another "odd" thing here.
>
> .set /host=pluto
>
> NCT -- CTERM is not available on host
> NCT -- Using RMT
>
>
> RMT -- Remote Host incompatibility error
>
>
> .
>
> Sigh. Seems like I have a few more bugs in RSX I should look at.
>
> Johnny
>
>> On 2018-08-13 02:08, Johnny Billquist wrote:
>> Cool. Thanks for leading me to it. And that machine I can talk to from MIM without problems, so it's something specific to that machine it appears.
>> Johnny
>>> On 2018-08-12 23:49, Steve Davidson wrote:
>>> PLUTO:: is available for testing.
>>>
>>> -Steve Davidson
>>>
>>> Sent from my iPhone
>>>
>>>> On Aug 12, 2018, at 17:32, Keith Halewood <Keith.Halewood at pitbulluk.org> wrote:
>>>>
>>>> When I use set host on vms to login to the little rsts/e box, I have to:
>>>>
>>>> Set host/app=rt
>>>>
>>>> To connect to rterm and not cterm. It works quite well.
>>>>
>>>>> On 12 Aug 2018, at 22:24, Johnny Billquist <bqt at softjar.se> wrote:
>>>>>
>>>>> On 2018-08-12 22:30, Paul Koning wrote:
>>>>>>> On Aug 12, 2018, at 4:22 PM, Johnny Billquist <bqt at softjar.se> wrote:
>>>>>>>
>>>>>>> On 2018-08-12 21:28, Paul Koning wrote:
>>>>>>>>> On Aug 12, 2018, at 9:12 AM, Johnny Billquist <bqt at softjar.se> wrote:
>>>>>>>>>
>>>>>>>>> Hi.
>>>>>>>>>
>>>>>>>>>> ...
>>>>>>>>>
>>>>>>>>> By exploring adjacent nodes and known circuits, you'd get a more complete picture, as it will also show you connections which are not the lowest cost paths.
>>>>>>>>>
>>>>>>>>> However, as I said, it will only give a partial picture anyway. I also found out the other day that it don't seem like RSTS/E implements it either, or maybe it depends on version and maybe it's optional.
>>>>>>>> DECnet/E definitely implements NICE, has from the beginning (i.e., from when DECnet/E 2.0 which is the Phase III release was first shipped).
>>>>>>>> However, it need not be enabled as a known object. And if enabled, it may or may not accept connections without access control variables (PPN/password). If not, you'll get a reject indicating either no such object or bad access control. However, if the connection is accepted you should find a full implementation.
>>>>>>>> Of course mapping information exists only in routers; if the node you're talking to is an endnode it will only tell you who the adjacent designated router is (or the adjacent nodes, on point to point circuits).
>>>>>>>
>>>>>>> In this case not enabled then, I think. Thanks for clarifying that it exists. I only did a reflection based on trying to look at an RSTS/E node just the other day that did not give me anything.
>>>>>>>
>>>>>>> .ncp tell marduk sho exec
>>>>>>> NCP -- Show failed, Listener connect failed, network resources
>>>>>> If it's not enabled I'd expect an error. Network resources is a bit odd. Possibly there is a default account defined but that account doesn't exist, or is configured as "no network connections allowed".
>>>>>
>>>>> Agreed that it's a bit surprising error. I have not tried looking deeper into it. Maybe I should. Do you have any RSTS/E system online I can try talking to just to make sure it's nothing more general?
>>>>>
>>>>>>> And I did verify that it's an up and running RSTS/E system. V9.6 according to information I have.
>>>>>>>
>>>>>>> Might also be some other kind of problem somewhere that I haven't figured out. System also isn't talking CTERM, but did answer when I tried some RSTS/E specific terminal protocol.
>>>>>> RSTS/E doesn't support CTERM, only the older OS-specific procotol. That doesn't involve DECnet credential checking (instead you get a RSTS login prompt).
>>>>> I believe I concluded as much. :-)
>>>>> However, CTERM will/would only lead you to a login prompt as well.
>>>>>
>>>>> The RSTS/E specific remote terminal application under RSX have some bug, though. When it finishes, it crashes the RSX system. Definitely a problem I need to fix.
>>>>>
>>>>> Johnny
>>>>>
>>>>> --
>>>>> Johnny Billquist || "I'm on a bus
>>>>> || on a psychedelic trip
>>>>> email: bqt at softjar.se || Reading murder books
>>>>> pdp is alive! || tryin' to stay hip" - B. Idol
>>>
>
> --
> Johnny Billquist || "I'm on a bus
> || on a psychedelic trip
> email: bqt at softjar.se || Reading murder books
> pdp is alive! || tryin' to stay hip" - B. Idol
More information about the Hecnet-list
mailing list