[HECnet] MOKSHA update: Cisco 7206VXR

[Brian Hechinger]

If my Cisco tunnel config engine still works you can use that. It pushes
tunnel configs to your router.

On Mon, Feb 11, 2019, 20:42 Supratim Sanyal <supratim at riseup.net wrote:

> Hi Johnny,
>
> MOKSHA (1.579) is now an emulated Cisco 7206VXR router with R7000 CPU
> running IOS 12.3(15). Please see if you can update the HECnet database
> whenever you get around to updating it next (absolutely no hurry!).
>
> I am very new to CISCO and am hoping to eventually get to a point where
> I can have a redundant connection to HECnet through this router. What is
> the recommended way to connect to HECnet via a CISCO router?
>
> CISCO-R1>show decnet interface f0/0
> FastEthernet0/0 is up, line protocol is up, encapsulation is ARPA
>    Interface cost is 20, priority is 64, DECnet network: 0
>    We are the designated router
>    Sending HELLOs every 6 seconds, routing updates 40 seconds
>    PhaseIV VAX cluster hold time is 300 seconds
>    Smallest router blocksize seen is 1498 bytes
>    Routing input list is not set, output list is not set
>    Access list is not set
>    DECnet fast switching is enabled
>    Number of L1 router adjacencies is : 3
>    Number of L2 router adjacencies is : 0
>    Number of non-PhaseIV+ router adjacencies is : 3
>    Number of PhaseIV+ router adjacencies is : 0
>
> Thanks
> Supratim
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20190211/c4e24ff0/attachment.html>