[HECnet] MOKSHA update: Cisco 7206VXR

[Supratim Sanyal]

A google search for "Brian Hechinger tunnel config engine" did not work. 
How/where does one run this engine?

On 2/11/2019 20:54, Brian Hechinger wrote:
> If my Cisco tunnel config engine still works you can use that. It 
> pushes tunnel configs to your router.
>
> On Mon, Feb 11, 2019, 20:42 Supratim Sanyal <supratim at riseup.net 
> <mailto:supratim at riseup.net> wrote:
>
>     Hi Johnny,
>
>     MOKSHA (1.579) is now an emulated Cisco 7206VXR router with R7000 CPU
>     running IOS 12.3(15). Please see if you can update the HECnet
>     database
>     whenever you get around to updating it next (absolutely no hurry!).
>
>     I am very new to CISCO and am hoping to eventually get to a point
>     where
>     I can have a redundant connection to HECnet through this router.
>     What is
>     the recommended way to connect to HECnet via a CISCO router?
>
>     CISCO-R1>show decnet interface f0/0
>     FastEthernet0/0 is up, line protocol is up, encapsulation is ARPA
>        Interface cost is 20, priority is 64, DECnet network: 0
>        We are the designated router
>        Sending HELLOs every 6 seconds, routing updates 40 seconds
>        PhaseIV VAX cluster hold time is 300 seconds
>        Smallest router blocksize seen is 1498 bytes
>        Routing input list is not set, output list is not set
>        Access list is not set
>        DECnet fast switching is enabled
>        Number of L1 router adjacencies is : 3
>        Number of L2 router adjacencies is : 0
>        Number of non-PhaseIV+ router adjacencies is : 3
>        Number of PhaseIV+ router adjacencies is : 0
>
>     Thanks
>     Supratim
>
-- 
Sent via Thunderbird for Windows 10 on Lenovo Legion Y720

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sonic.net/pipermail/hecnet-list/attachments/20190216/df0823a2/attachment.html>